1 push/push for coil split x2 and 1 push/push for reverse phase. It’s on a LP.

[ChunkyGuitar]

Hey fantastic guys and gals. Been trying to get this done e for a hot minute. 2 Diagrams from G. electronics has not been successful. Haven’t seen one that will allow coil split on 1 push / push and 1 for phase. Using 2 vol and 2 tone. Probably wired this thing up 6 or 7 times from scratch just can’t seem to get it to work. splitting seems to be alright although super weak from pups even when cranked. Put the phase in zero sound. Solder skills are adequate not a problem that I know of but I would say above average. Had this going last time was mocked up for testing not finished. Any help appreciated.

 

[jeremy]

this is totally doable, i have it on one of my homemade guitars. let me see if i can find a schematic

 

[Artie]

I just did the push-push's for split & phase quik 'n dirty. The one on the right can be either the bridge or neck. Whichever one you want to OOP.