2 hum, 1 vol, 1 tone and 4pole 6 throw

[Jlindner]

My mind is blown trying to think of how to make the following happen (if it's possible).

I have 2 humbuckers,1 push pull volume, 1 push pull tone and a 4 pole 6 throw rotary switch. (Dimarzio push pulls and the 6way has this model# SWR61.)

My goal would be to have the ability to:
Humbucker Neck only
Both humbucker on
Bridge Humbucker only
Neck coil split only
Both neck and bridge coil split
Bridge only coil split

Then have the ability to make the setup all parallel and/or series.

Is this possible????? Or am I crazy? Any help with wiring diagram?

Thanx guys

 

[GuitarDoc]

Re: 2 hum, 1 vol, 1 tone and 4pole 6 throw

With one p/p you can split both pups.
While I personally like parallel tone, I see that most people don't and prefer the split sound.
If I were you, I'd try each pup in parallel vs split mode and see what you think. You may like it or not and you may just like the parallel tone on one pup (I mainly only like it in the bridge only). If you find the same likes. then it is a simple task to use the other p/p pot to wire the bridge pup for series/parallel.
No need for the rotary, which IMO is a real pain to use.