muttznmongrelz
New member
Rarely do I find a guitar with which I am as impressed as I am with this Ibby. Great feature set, high quality build, 5 piece neck/neck thru, DiMarzios, string through body, jumbo frets and nicely finished, Gibraltar Custom Bridge...looks Badass and plays/sounds great too.
The Ibanez VBT700 or V-Blade guitar is a flying V guitar model, introduced in 2007 as part of the Ibanez X series. Originally, the design came from a custom v-shaped guitar that was made for Dragonforce guitarist Sam Totman. Despite some rumors this was not an official signature series but rather a "spin-off" of the original custom design. Totman did get his own signature series in 2008 based on the Iceman, the STM. The VBT700 was the only V-Blade model that was mass produced to the public and was only available in 2007. It has since been discontinued.
Features include a neck through body construction, rosewood fingerboard with sharktooth inlays, a hard-tail bridge with string-through body, and two DiMarzio humbucking pickups.
Specifications for VBT700
Name: VBT700
Years: 2007
Areas: Worldwide
Made in: Indonesia
Finishes: BK (Black) / WH (White)
Body
Body material:Mahogany
Neck joint:Neck-thru
Bridge:Gibraltar Custom bridge
Hardware color:Black
Neck
Neck type:Wizard II
Neck material:5-Piece Maple/Walnut
Fingerboard:Bound Rosewood
Inlays:Sharktooth
Frets:24 / Jumbo
Electronics
PU Config:HH
Neck PU
iMarzio D Activator
Bridge PU
iMarzio D Activator
Controls:1 Volume / 1 Tone / 3-Way Toggle
The Ibanez VBT700 or V-Blade guitar is a flying V guitar model, introduced in 2007 as part of the Ibanez X series. Originally, the design came from a custom v-shaped guitar that was made for Dragonforce guitarist Sam Totman. Despite some rumors this was not an official signature series but rather a "spin-off" of the original custom design. Totman did get his own signature series in 2008 based on the Iceman, the STM. The VBT700 was the only V-Blade model that was mass produced to the public and was only available in 2007. It has since been discontinued.
Features include a neck through body construction, rosewood fingerboard with sharktooth inlays, a hard-tail bridge with string-through body, and two DiMarzio humbucking pickups.
Specifications for VBT700
Name: VBT700
Years: 2007
Areas: Worldwide
Made in: Indonesia
Finishes: BK (Black) / WH (White)
Body
Body material:Mahogany
Neck joint:Neck-thru
Bridge:Gibraltar Custom bridge
Hardware color:Black
Neck
Neck type:Wizard II
Neck material:5-Piece Maple/Walnut
Fingerboard:Bound Rosewood
Inlays:Sharktooth
Frets:24 / Jumbo
Electronics
PU Config:HH
Neck PU
Bridge PU
Controls:1 Volume / 1 Tone / 3-Way Toggle
Last edited: