Hi everyone,
I'm getting ready to do my first pickup swap and am considering upgrading the pots and caps while I'm at it.
The set up is Humbucker in the bridge and single coil sized humbucker at the neck with a 3 position switch, 2 volume pots, and 1 tone w/push-pull coil tap similar to this diagram:
https://guitarelectronics.com/2-humbuckers-3-way-toggle-switch-2-volumes-1-tone-coil-tap/
I'm looking to use a Nazgul and SHR-1n. Would 500K pots all around and a .022 cap on the tone be an appropriate starting place?
Thanks,
Jake
I'm getting ready to do my first pickup swap and am considering upgrading the pots and caps while I'm at it.
The set up is Humbucker in the bridge and single coil sized humbucker at the neck with a 3 position switch, 2 volume pots, and 1 tone w/push-pull coil tap similar to this diagram:
https://guitarelectronics.com/2-humbuckers-3-way-toggle-switch-2-volumes-1-tone-coil-tap/
I'm looking to use a Nazgul and SHR-1n. Would 500K pots all around and a .022 cap on the tone be an appropriate starting place?
Thanks,
Jake
