Better technology-so why are tube amps here ?
- Thread starter Gold star
- Start date
PFDarkside
of the Forum
Re: Better technology-so why are tube amps here ?
IMO playing a tube amp is like driving an old carbureted sports car with manual steering. It’s a visceral, “real” experience. My best and favorite tones have come from a tube amp turned loud with somewhere between 0 and 2 pedals, preferably with vintage style (aka passive, traditional construction) pickups. I like all the tones you can get out of modeling, my board has a few “amp in a box” pedals, but the best tones have always been then simplest.
I’ve never played an AxeFX, Helix or Kemper through a loud tube amp into a guitar cab, that may be a revelation for me... but for now I’m happy.
IMO playing a tube amp is like driving an old carbureted sports car with manual steering. It’s a visceral, “real” experience. My best and favorite tones have come from a tube amp turned loud with somewhere between 0 and 2 pedals, preferably with vintage style (aka passive, traditional construction) pickups. I like all the tones you can get out of modeling, my board has a few “amp in a box” pedals, but the best tones have always been then simplest.
I’ve never played an AxeFX, Helix or Kemper through a loud tube amp into a guitar cab, that may be a revelation for me... but for now I’m happy.
ErikH
Well-known member
Re: Better technology-so why are tube amps here ?
Nice. Those MkIII amps are crazy dynamic. I would do the same as you and roll off the volume for clean (or clean-ish) tones. Sold my 100 watt head a few years ago. I miss the tone but I don't miss the weight.
Thankfully, I'm able to get the same dynamics from current amp, a Vox AV30 combo. Nice and light but LOUD!!!
Nice. Those MkIII amps are crazy dynamic. I would do the same as you and roll off the volume for clean (or clean-ish) tones. Sold my 100 watt head a few years ago. I miss the tone but I don't miss the weight.
Thankfully, I'm able to get the same dynamics from current amp, a Vox AV30 combo. Nice and light but LOUD!!!
Re: Better technology-so why are tube amps here ?
I'd say part of it is the hands-on aspect, at least for those who have an electronics slant to their interests. You can shape the tone of the amp by swapping tubes, speakers, cabinet materials. On the other side of the guitar cable, you have the guitar pickups, electronics, body and neck materials. The strings are a factor, even the paint on the guitar. It just encourages tinkering. You don't get as much of that with the digital stuff. On the other hand, digital is only limited by the quality of the programming and your imagination. I think it has its own "beat" to it.
I'd say part of it is the hands-on aspect, at least for those who have an electronics slant to their interests. You can shape the tone of the amp by swapping tubes, speakers, cabinet materials. On the other side of the guitar cable, you have the guitar pickups, electronics, body and neck materials. The strings are a factor, even the paint on the guitar. It just encourages tinkering. You don't get as much of that with the digital stuff. On the other hand, digital is only limited by the quality of the programming and your imagination. I think it has its own "beat" to it.
Re: Better technology-so why are tube amps here ?
Through a PA and recorded, my Fractal is amazing. In a room, my amps sound better. Onstage, my amps sound better, but the Fractal fits better in a recorded mix (and is easier to mix out front). When it comes down to it, know which one I use?
The one that is closest to the front door on my way out.
Through a PA and recorded, my Fractal is amazing. In a room, my amps sound better. Onstage, my amps sound better, but the Fractal fits better in a recorded mix (and is easier to mix out front). When it comes down to it, know which one I use?
The one that is closest to the front door on my way out.
NegativeEase
New member
Ascension
Well-known member
Ascension
Well-known member
Re: Better technology-so why are tube amps here ?
1993 old band Carvin DC 200 MK III compressor live for the ebow style stuff and feedback.
https://www.soundclick.com/html5/v4/player.cfm?songID=5539540
Sold this combo but at some point intend to find a 50 watt head. LOVE these amps but rare to play now days where I can really use a single channel combo. With a head I can crank it on stage run a cab miced in the back for many places or when playing a loud Church or outdoors run a 2/12 cab. These have great sounding loops for a little verb and delay throw a wah in the front and then a CS -3 for ebow style infinite sustain and feed back and I'm set!!Nice. Those MkIII amps are crazy dynamic. I would do the same as you and roll off the volume for clean (or clean-ish) tones. Sold my 100 watt head a few years ago. I miss the tone but I don't miss the weight.
Thankfully, I'm able to get the same dynamics from current amp, a Vox AV30 combo. Nice and light but LOUD!!!
1993 old band Carvin DC 200 MK III compressor live for the ebow style stuff and feedback.
https://www.soundclick.com/html5/v4/player.cfm?songID=5539540
Last edited:
bloughlin16
New member
Re: Better technology-so why are tube amps here ?
I've had Helix Native for over two years and my Helix Rack for about a year (IMO, the hardware Helix sounds a touch better, probably because of how the DI box/interface affects the sound before it gets to the plugin). As Despair said, the feel and dynamics are absolutely there. The added benefit that the Sag control gives you is a real treat, too: I turn it down on our patches using the PV Panama (5150) model and it makes the amp noticeably tighter. The stock cabs leave a lot to be desired for me, but I use third party IRs (primarily from OwnHammer and ML Sound Lab) direct to front of house, and even our FOH engineer says that they sound so similar to our actual cabs that he actually prefers that we go direct because of the added benefit of consistency.
I've had Helix Native for over two years and my Helix Rack for about a year (IMO, the hardware Helix sounds a touch better, probably because of how the DI box/interface affects the sound before it gets to the plugin). As Despair said, the feel and dynamics are absolutely there. The added benefit that the Sag control gives you is a real treat, too: I turn it down on our patches using the PV Panama (5150) model and it makes the amp noticeably tighter. The stock cabs leave a lot to be desired for me, but I use third party IRs (primarily from OwnHammer and ML Sound Lab) direct to front of house, and even our FOH engineer says that they sound so similar to our actual cabs that he actually prefers that we go direct because of the added benefit of consistency.
Re: Better technology-so why are tube amps here ?
So the only modeling amp I have ever had was a really low cost Fender that came with the guitar I had purchased. It was fun at the time but the more I delved into guitars/amps I was really drawn to tube amps since my thought was if it broke I should be able to fix it and plus everywhere I looked that was what people were using.
A bit after that I decided I wanted to build my own tube amp to learn some more about them. So I went ahead and built a very nice 50 watt Marshall clone. It was great being able to pick and choose what components I wanted in the amp along with the choice of power/preamp tubes. Great fun.
So reading through this thread and seeing some of the brands mentioned I just did a really look over at Fractal’s webpage since I felt these type of amps had to be PC board based device’s. The second paragraph down on their flagship product stated this:
“Two 1.0 GHz, floating-point “Keystone” Digital Signal Processors (DSPs) comprise the main audio engine. These processors are the most powerful DSPs available delivering over twice the performance of the DSPs used in our previous generation products. To feed these advanced processors we coupled 4Gb of blazing fast PC1600 DDR3 memory, hundreds of Mb of FLASH memory, a proprietary FPGA and a rich set of peripherals.”
So just based off of that it makes it very clear they are PC based devices. My point and or question for these type of devices would be, well what happens when the “now newer DSP” comes out? Do these devices have some way of being “upgraded”, pretty much like a firmware upgrade or is the owner now holding outdated technology? In my mind, and I could be really wrong on this is, that to me they seem like a PC, almost outdated by the time you get it home.
For a tube amp, if some new component comes out that may change the way the amp sounds and you like it, solder it in or try different tubes. What do folks who use these types of devices do?
Again, I have never used one so my above thoughts were just a things that came to mind.
So the only modeling amp I have ever had was a really low cost Fender that came with the guitar I had purchased. It was fun at the time but the more I delved into guitars/amps I was really drawn to tube amps since my thought was if it broke I should be able to fix it and plus everywhere I looked that was what people were using.
A bit after that I decided I wanted to build my own tube amp to learn some more about them. So I went ahead and built a very nice 50 watt Marshall clone. It was great being able to pick and choose what components I wanted in the amp along with the choice of power/preamp tubes. Great fun.
So reading through this thread and seeing some of the brands mentioned I just did a really look over at Fractal’s webpage since I felt these type of amps had to be PC board based device’s. The second paragraph down on their flagship product stated this:
“Two 1.0 GHz, floating-point “Keystone” Digital Signal Processors (DSPs) comprise the main audio engine. These processors are the most powerful DSPs available delivering over twice the performance of the DSPs used in our previous generation products. To feed these advanced processors we coupled 4Gb of blazing fast PC1600 DDR3 memory, hundreds of Mb of FLASH memory, a proprietary FPGA and a rich set of peripherals.”
So just based off of that it makes it very clear they are PC based devices. My point and or question for these type of devices would be, well what happens when the “now newer DSP” comes out? Do these devices have some way of being “upgraded”, pretty much like a firmware upgrade or is the owner now holding outdated technology? In my mind, and I could be really wrong on this is, that to me they seem like a PC, almost outdated by the time you get it home.
For a tube amp, if some new component comes out that may change the way the amp sounds and you like it, solder it in or try different tubes. What do folks who use these types of devices do?
Again, I have never used one so my above thoughts were just a things that came to mind.
ibanezrocks
HardtailPisser
Re: Better technology-so why are tube amps here ?
After a certain point it's not necessary to upgrade the hardware. The Helix will still sound good 50 years from now. Increasing the DSP power just lets you run more effects at a time. There'll be many more Helixes I'm sure, but I doubt the sound will be noticeably different.
Sent from my BlackBerry using Tapatalk
Hardware is updated by buying new hardware, but firmware is updated all the time. The Helix has had very good support. They add more effects and amp models and you get it for free. The competition in this space is growing and consumers are benefiting.
After a certain point it's not necessary to upgrade the hardware. The Helix will still sound good 50 years from now. Increasing the DSP power just lets you run more effects at a time. There'll be many more Helixes I'm sure, but I doubt the sound will be noticeably different.
Sent from my BlackBerry using Tapatalk
Jacew
New member
Re: Better technology-so why are tube amps here ?
Ironically, it's very unlikely that that hardware will be working anymore then, where as tube amp will sound exactly like it does and work just the same it did 50 years before.
Ironically, it's very unlikely that that hardware will be working anymore then, where as tube amp will sound exactly like it does and work just the same it did 50 years before.
JB_From_Hell
Jomo's Nimions
Re: Better technology-so why are tube amps here ?
Why do people who like tubes spend so much time griping about digital and solid-state?
Why do people who like digital and solid-state never spend any time griping about tubes?
Seriously, if you like using tubes, that's great. If you like digital or solid-state, that's also great. If you're Plini, and have played onstage in front of legions of fans across the world before you've ever even plugged into a real amplifier, I kind of think that's even cooler than the other two.
Why do people who like tubes spend so much time griping about digital and solid-state?
Why do people who like digital and solid-state never spend any time griping about tubes?
Seriously, if you like using tubes, that's great. If you like digital or solid-state, that's also great. If you're Plini, and have played onstage in front of legions of fans across the world before you've ever even plugged into a real amplifier, I kind of think that's even cooler than the other two.
NegativeEase
New member
Re: Better technology-so why are tube amps here ?
Wait, now I'm confused... WHo's griping on here? :lmao:
Wait, now I'm confused... WHo's griping on here? :lmao:
