Can Someone help me please.

[drumking_111]

Hi
I just recently purchased a fender p bass, the electronics in it are bad, so i went out and bought all new pots, 1/4" jack, wire, and a set of ducan/basslines SPB-3. When i installed them and all of the other new parts, it had a nasty high pitch hum. So I checked all of my grounds and they are good. Next I bypassed the pots and run the pickups direct and i still have the hum, can someone tell me what I can do or maybe tell me a different set of pickups. Oh and I have no Florecenet (spelling) lights, tv/monitors, and/or speakers around the pickups while testing. Thanks for reading and trying to help me. any advice will be appreciated.

 

[Curly]

Re: Can Someone help me please.

here is a link to the troubleshooting section of the FAQ on the main site:

troubleshooting

read through some of the questions, and you'll find a way to track down problems, even if you don't have an ohm meter

as it says in this section, you should be able to find the problem, but if not, it may be time to take it to a tech