Alvin
New member
This is Clone #011. The body is made from 2 pieces of Alder and is a full size Strat shape. The black/cream pickup is a Seymour Duncan Custom Shop Warren D. Martini RTM. This pickup kills! It has a chrome OFR, Gotoh tuners, and chrome strap buttons. The D-tuna in the pics DOES NOT come with the guitar.
The neck is the sickest I have ever seen. It is a copy of a Wayne that is now the standard neck shape for all the Clone guitars. It is an absolutely killer birdseye maple neck and board, birdseye on the back of the neck and the fretboard. It has a 12" radius, C-shaped, measures .790" at the first fret, and .850" at the 12th fret, and the frets are 6100 jumbos, and the nut is 1 11/16".
This guitar was built in New York, USA. This is the only Clone built with a matching headstock and a silver Clone logo. The paint was done by Marty Bell. Ships in HSC.
I am interested in trades, so make me an offer I can't refuse. :lol:
The neck is the sickest I have ever seen. It is a copy of a Wayne that is now the standard neck shape for all the Clone guitars. It is an absolutely killer birdseye maple neck and board, birdseye on the back of the neck and the fretboard. It has a 12" radius, C-shaped, measures .790" at the first fret, and .850" at the 12th fret, and the frets are 6100 jumbos, and the nut is 1 11/16".
This guitar was built in New York, USA. This is the only Clone built with a matching headstock and a silver Clone logo. The paint was done by Marty Bell. Ships in HSC.
I am interested in trades, so make me an offer I can't refuse. :lol:
