coil split cool rails

[southpawpete]

Apologies if this is already answered, but I couldn't find it elsewhere.

I'm installing a cool rails in my amstd strat tomorrow. I don't need fancy switching, but I would like it to be single coil when combined with the middle pup and, obviously, full humbucking on its own.

Is there a wiring diagram for this anywhere?

Many thanks

Pete

 

[Artie]

Re: coil split cool rails

Welcome aboard. Its here: 1hum_1vol_1tone_split

It's the same for any humbucker. Short red and white to ground to split.

 

[southpawpete]

Re: coil split cool rails

Welcome aboard. Its here: 1hum_1vol_1tone_split

It's the same for any humbucker. Short red and white to ground to split.

Thanks, but how do I translate that to a 5 way switch? Sorry for the questions, but I've only ever wired in single coils before - this seems a lot more complicated!

 

[Artie]

Re: coil split cool rails

So, you want it to be itself when in the neck position, but split when combined with the middle pup, in the "notch" position?

 

[Demanic]

Re: coil split cool rails

^^
Sounds like it.

 

[southpawpete]

Re: coil split cool rails

Close, but it's going in the bridge. So humbucking "mode" on its own and single coil mode when combined with the middle pup.

 

[southpawpete]

Re: coil split cool rails

Don't worry guys, I found it...

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w_as