Diagram Help 2 Hum, 3 way toggle, 1 Vol (push/pull for master series parallel)

F

FTBTX

New member
Does anyone have a diagram for 2 Hum, 3 way toggle, 1 Vol (push/pull for master series parallel)
The humbuckers are on triple shots, so only two wires.

Thanks for your help,
FTB
 
Re: Diagram Help 2 Hum, 3 way toggle, 1 Vol (push/pull for master series parallel)

You can't have a "master" p/p for series/parallel. You need one dpdt p/p for each pup.

Here's how you wire the series/parallel p/p (or with an on/on/on toggle you can get series/split/parallel). You would have to combine this wiring diagram to the basic diagram to get what you want.

Basic diagram:
https://docs.google.com/gview?embed...n.com/wp-content/uploads/2016/05/2H_3G_1V.pdf


Series/parallel diagram:
https://docs.google.com/gview?embed.../uploads/2016/05/WD_Pushpull_minitoggle_3.pdf
 
Re: Diagram Help 2 Hum, 3 way toggle, 1 Vol (push/pull for master series parallel)

GuitarDoc said:
You can't have a "master" p/p for series/parallel. You need one dpdt p/p for each pup.

Here's how you wire the series/parallel p/p (or with an on/on/on toggle you can get series/split/parallel). You would have to combine this wiring diagram to the basic diagram to get what you want.

Basic diagram:
https://docs.google.com/gview?embed...n.com/wp-content/uploads/2016/05/2H_3G_1V.pdf


Series/parallel diagram:
https://docs.google.com/gview?embed.../uploads/2016/05/WD_Pushpull_minitoggle_3.pdf
Click to expand...

Thanks Doc! I should have just explained my desired end result. I was a bit out of it yesterday and feeling more lucid today.
I have a guitar with the P-rails with triple shots installed. It is bottom routed and has holes for one pot, one LP style toggle and one mini toggle.
I'd like to set it up so I control the p-rails from the triple shots and be able to select whether the p-rails are in parallel or series when in the middle position.
I don't think I'd have much need for in-phase/out of phase. I really don't want to have to drill a larger hole, I'm afraid it might go badly since it has a gloss finish.
Any advice would be appreciated.

Thanks,
FTB
 
Re: Diagram Help 2 Hum, 3 way toggle, 1 Vol (push/pull for master series parallel)

FTBTX said:
Thanks Doc! I should have just explained my desired end result. I was a bit out of it yesterday and feeling more lucid today.
I have a guitar with the P-rails with triple shots installed. It is bottom routed and has holes for one pot, one LP style toggle and one mini toggle.
I'd like to set it up so I control the p-rails from the triple shots and be able to select whether the p-rails are in parallel or series when in the middle position.
I don't think I'd have much need for in-phase/out of phase. I really don't want to have to drill a larger hole, I'm afraid it might go badly since it has a gloss finish.
Any advice would be appreciated.

Thanks,
FTB
Click to expand...

i think I know what you want.. No guarantees but ill give it a shot.. already drawn it up in my head so lets see if i can put it in a more tangible format

edit>>> done.. i need to add some color. I could be wrong but my solution set for this problem looks like it will work
 
Last edited:
Re: Diagram Help 2 Hum, 3 way toggle, 1 Vol (push/pull for master series parallel)

after looking at it.. IF the pickup selector is set for the neck AND the switch is engaged ..might cause problems such as no sound.
 
Re: Diagram Help 2 Hum, 3 way toggle, 1 Vol (push/pull for master series parallel)

Brandenburg said:
after looking at it.. IF the pickup selector is set for the neck AND the switch is engaged ..might cause problems such as no sound.
Click to expand...

Thank you so much!! That is perfect, I'll give it a try tonight.
 
You must log in or register to reply here.
Back
Top