Does the Twin Reverb take fuzz pedals well ?

Re: Does the Twin Reverb take fuzz pedals well ?

I don't see why not. I've found that Fender amps take to pedals very well . My Studio 85 combo works very well with my Danelectro Fab Distortion and Chorus pedals really great and IMo, improves the sound of them both.
 
Re: Does the Twin Reverb take fuzz pedals well ?

Thanks for the suggestions Bill, would a tube swap fix the thin cleans ? I will look over the manual now

It seems when I turn up the Mids past 8 o Clock the cleans just get thinner and thinner and twangier

A tube swap can make a very perceptible difference in the tone and feel of an amp. Again, the manual has some good info on when it's time to change them.

I think you're running the midrange too high. I think in these Mesas, the mid control from 0-4 works like a normal control from 0-10, and then it starts adding gain. Try lowering the mids, and boosting the channel master or the gain to compensate. These Mesas like the tone controls in the 3-7 range...that's where you'll find he best tones. Check the sample tones in the manual, and go from there.

One thing is...the LSS will never have the deep bass of the Fender circuit...by design. It's one of the trade-offs for that great lead tone. And most of the time on stage, you'll have to cut that bass...or your tone will get boomy, muddy, flubby.

How long have you been running your power tubes?

BTW, I use a very slight amount of clean boost from a DOD FX-10, especially with single coils, like my G&L Legacy's. It's my secret weapon with my Mesa amps.

Let me know what you find.

Bill
 
Re: Does the Twin Reverb take fuzz pedals well ?

Twins take all pedals well. Have no worries running anything you want with that amp. Beauty of a Twin is the cleans are so good , you can use that amp for ANY kind of music from Classical to extreme metal with the right pedals or effects processor.
 
Re: Does the Twin Reverb take fuzz pedals well ?

well I don't know if you guys listen to The Dead Weather but Dean the guitarist uses big muffs and fuzzes with 2 twin reverb reissues and on live performances his sound is pretty huge and good.

 
Re: Does the Twin Reverb take fuzz pedals well ?

IMHO, a (((LOUD))) Twin Reverb & a DbA Fuzz War (...or ZVex Mastotron) sounds godly.
 
Re: Does the Twin Reverb take fuzz pedals well ?

IMHO, a (((LOUD))) Twin Reverb & a DbA Fuzz War (...or ZVex Mastotron) sounds godly.

yeah I have heard sooo much about how fizzy the Twin reverb can be with drive and fuzz pedals but I keep hearing artists who use massive amounts of fuzz using twin reverbs. I think I'm goanna try some out or rent one and try it with my set up at home before I buy, maybe even take it to rehearsal
 
Re: Does the Twin Reverb take fuzz pedals well ?

I found most fuzzes pretty harsh with a Twin Reissue unless you can turn up the amp pretty loud. Fuzz face for example. A Muff may be a better choice with a clean twin. Just my opinion of course.
 
Re: Does the Twin Reverb take fuzz pedals well ?

Could also try the fuzz on the Empress Multidrive.
 
Re: Does the Twin Reverb take fuzz pedals well ?

yeah I have heard sooo much about how fizzy the Twin reverb can be with drive and fuzz pedals but I keep hearing artists who use massive amounts of fuzz using twin reverbs. I think I'm goanna try some out or rent one and try it with my set up at home before I buy, maybe even take it to rehearsal


Just keep in mind, that Jack White used a Big Muff + MXR Micro Amp with his Twin Reverbs live, and i love his live sound.

Under Blackpool Lights (UK - no vintage amps, just the Fenders) is a great DVD to check out what he got with that set up.
 
Re: Does the Twin Reverb take fuzz pedals well ?

Stock speakers take many forms in twin depending on the era, but if you are asking about the current reissue twins, then the speakers are jensen c12K's. Honest, hardworking and efficient speakers. Pretty defined scoop and a very present and cutting treble. They have a kind of metallic "kerrang" to their tone which can be hard on the ears.
To get the sweetest tone from a twin, its good to have speakers that are less efficient (i.e. less loud per watt) which allow you to have your amp turned up a little louder for the same apparent volume in the room, which will give a fatter, warmer tone. Perhaps more importantly, its good to have speakers that are a bit thicker in the mids and more rounded on the top. Bright, cutting treble is the sound that hurts the ears and makes people run for cover because things are too loud. Speakers that attenuate the treble somewhat are great for adressing this. Also, in stock form, the tone stack of a twin reverb is pretty heavily scooped (which is what gives that lush clean sound) according to Leo Fender's dislike of distortion. The Jensen speakers accentuate this. If you go for something thicker in the mids, you still get that greta fender clean sound, but with a little more muscle.
Which brings us to replacement speakers. Everyone has their own personal prefs, but in my experience the Eminence Texas heats are the best tool for the job in a twin.They have a very high (150w) wattage rating so they can easily handle all the massive lows of the 85 watt twin without breaking a sweat. Coupled to the hefty voice coil, they have what is a comparatively small magnet (generally used for lower wattage speakers) which reduces the efficency quite a lot and slows down the response. What this does is warm up your tone and add a little "squish" and a softer feel under your fingertips. Add to this, the ability to turn you amp up one extra knotch for the same volume and life is sweet. They also have a pretty subdued treble response so there is no icepick effect. You can of course get as much treble as you need, but its not anywhere near as strident as the jensens. Throw in a fat midrange and i reckon you have the perfect speaker for a twin.
I've had a lot of cats say to me that twins generally sound sound and hard but that mine is fat and warm and that they are really surprised - this goes double cos i have a fuzz face pretty mcuh "always on" for my non-jazz gigs. When i installed the texas heats (replacing a pair of weber californias - sexy boutique speakers) even the drummer said "wow you amp sounds heaps better"!
 
Last edited:
Re: Does the Twin Reverb take fuzz pedals well ?

You should just find a Bassman. They're incredible, and you get to choose the cab that's best for the amp. Honestly, the cabinet of a Twin Reverb would be my very last choice for the kind of music we play (which few of the people giving advice in this thread play at all).
 
Re: Does the Twin Reverb take fuzz pedals well ?

You should just find a Bassman. They're incredible, and you get to choose the cab that's best for the amp. Honestly, the cabinet of a Twin Reverb would be my very last choice for the kind of music we play (which few of the people giving advice in this thread play at all).


AMEN Bro . . . get an AB165 Bassman - i love mine.
 
Re: Does the Twin Reverb take fuzz pedals well ?

does the bassman have reverb though, I really need that spring reverb in my signal , I'm too used to it
 
Re: Does the Twin Reverb take fuzz pedals well ?

No, but you can get a good reverb pedal like the Hardwire Supernatural. Then you'll have spring reverb with a bunch of other reverbs.

I've never missed not having reverb on my amp. When I want a bit more space I use one of my delays and it sounds great. Seriously, I think this is the amp for you. The voicing just works great for this kind of music.

You will have to get it tuned up though, as with any 60's/70's amp. They're pretty cheap though so you still come out on top.
 
Re: Does the Twin Reverb take fuzz pedals well ?

thanks for the suggestion I shall scout the web for older bassmans. I guess they only come in heads?
 
Re: Does the Twin Reverb take fuzz pedals well ?

I played a small stadium with nothing but a twin reverb and a boss ds-2.

I had never heard the DS-2 kick as much ass as it did through the twin.
 
Back
Top