Duncans, Gibby & Lace pups

[butnut]

Duncan Custom Shop Floor Jazz neck with aged nickel cover. $60.00
Duncan Custom5 SH14 Zebra, has superfine hairlines between a few poles, came that way. $45.00
Gibson Bridge Black with gold screws, got it from a bro here sold the guitar it was going in. I'll post the #s later, it was 'hot' $35.00
Lace Holy Grail Strat Bridge Creme, the noiseless vintage one. $35.00
All prices are shipped from dis rock. NO screws/springs, if ya want the creme bridge ring and screws/springs on the C5, add 5 bucks... Paypal ONLY!:cool2:

 

[crossbow]

Re: Duncans, Gibby & Lace pups

Can you let me know what gibson pickup is these? 500T? or 498T?

How much wire left? screws available? mounts?

 

[butnut]

Re: Duncans, Gibby & Lace pups

Not sure, the bottom has the Gibson USA stamping and a "T" centered near the edge of the plate. It reads 16.75 and has about 11" of (2 conductor) wire. I have 2 screws for this, no springs.

 

[DonP]

Re: Duncans, Gibby & Lace pups

Not sure, the bottom has the Gibson USA stamping and a "T" centered near the edge of the plate. It reads 16.75 and has about 11" of (2 conductor) wire. I have 2 screws for this, no springs.

At first I was going to guess 498T, because these were common in LP Customs, and someone might have taken the gold cover off.

But at 16.75K, that's hotter than a 500T for the most part.

 

[The Dali]

Re: Duncans, Gibby & Lace pups

The Gibson is probably a 500T - chances are it was removed from a Gibson Explorer with gold hardware.

 

[Mark Cearlock]

Re: Duncans, Gibby & Lace pups

Pm on jazz n