Eight Warmoth necks (some new, some used)

ICTGoober

ICTGoober

New member
These are all necks I've had for years, taken on trades for service or parts, or purchased for projects that never happened. Since clients haven't popped for them, it's time to disperse. I won't post pictures to start with - it would just be too overwhelming. So I'll start with descriptions, and then post a couple photos late today. If you are interested, then I can send you as many pix as you like. As always, I do not ship outside the lower 48 states. We can discuss payment when ready.

NEW
Lefty Strat - roasted maple w/ pau ferro board.25.5 scale length, 6105 frets, 1.628" nut width. Neck profile is chunky. $200 plus shipping.

NEW (SOLD)
Tele - bird's eye maple (neck and board), 25.5 scale length, jumbo frets,1 5/8" nut width. Neck profile is a V, abalone dots. $185 plus shipping

NEW (SOLD)
Vulture/Hawk/Beak peghead? (no longer offered) Paduak w/ wenge board, 24 3/4" scale length. 1.700" nut width, 6105 stainless frets, Gotoh fine tuner truss rod, white Graphtech nut. $250 plus shipping

NEW (SOLD)
Slapshot (Kramer) - maple on maple, 25.5" scale length, 1.630 nut, 6100 frets. Drilled for Fender locking tuners, string retainer and string tree. $165 plus shipping.

USED (SOLD)
Warmoth - solid rosewood, 24 3/4" scale length, 6150 stainless frets, '59 neck carve, 1.700" nut width, black Graphtech nut, Schaller ream on tuner holes. $350 plus shipping

USED
Warmoth - wenge on wenge, 24 3/4" scale length, 6105 frets, boatneck carve, abalone dots, white Graphtech nut, 1.700" nut width, 2 broken off screws in face of peghead. $300 plus shipping

USED
Tele - wenge w/ ebony board, 25.5" scale length, pearl dots, white Graphtech nut, nick on lower edge of peghead face, drilled for Sperzels. $325 plus shipping

USED
Old Regal peghead (no longer offered) - paduak w/ black korina board. 24 3/4" scale length, 6100 Jescar Gold stainless frets, '59 neck carve, pearloid crown inlays, 1.686 nut. $375 plus shipping
 
Last edited:
tell me more about this lefty chunky strat neck, know what carve it is? is the nut setup for a normal right handed guitar?
 
tell me more about this lefty chunky strat neck, know what carve it is? is the nut setup for a normal right handed guitar?
Click to expand...

Sometimes they'll put a stamp on the heel as a clue, this one doesn't have one. From the skunk stripe to the fingerboard it measures almost an inch thick - this is from the nut to the 12th fret. There is no nut - just the slot. The dots are on the normal side, so this is a lefty peghead on a righty neck.

Feels real silky in the hand. Never been a screw in this thing. I should mention it has the Warmoth Radius fingerboard.
 
Last edited:
ICTGoober said:
Sometimes they'll put a stamp on the heel as a clue, this one doesn't have one. From the skunk stripe to the fingerboard it measures almost an inch thick - this is from the nut to the 12th fret. There is no nut - just the slot. The dots are on the normal side, so this is a lefty peghead on a righty neck.

Feels real silky in the hand. Never been a screw in this thing. I should mention it has the Warmoth Radius fingerboard.
Click to expand...

what tuners is it drilled for? im interested
 
You must log in or register to reply here.

Similar threads

O
First new build since 2022, and a little 'gift' from Gibson
2
Replies
27
Views
126
playas
playas
M
Baritone & Bass VI Conversion Necks
Replies
7
Views
220
ICTGoober
ICTGoober
Coryd
FS: PRS Mark Holcomb SE
Replies
2
Views
231
Coryd
Coryd
Archer250
FS: Rangka Custom Superstrat (nice figured quilt)
Replies
0
Views
160
Archer250
Archer250
Phantasmagoria
NGD: Another new Kramer
Replies
8
Views
517
Phantasmagoria
Phantasmagoria
Back
Top