Re: Epiphone Les Pauls
Well... Epi's p'ups have always been Epi's Achilles Heel. They come drowned in wax and the vital components like the baseplates, slugs and specially the polepieces screws suck like no others... the winds, however, are good if a bit too hot for my taste. It took me a lot of work to get decent tones of those p'ups. I had to change the brass baseplates with nickel silver ones from StewMac and the polepiece screws with good quality 1022 steel Mojotone screws, plus I had to take away all that wax... yikes!
Anyway, after that I could make some good PAFish bridge p'ups with those, measuring 8.3K and 8.6K they were too hot for the neck position.
Paired with a couple of HB103N with A5 magnets (they're very close to a Jazz neck), they sounded very good in SG type mahogany guitars. Both owners are very happy with'em.
I have both brands... They each have pros and cons
I just can not see paying the price that gibson wants, when I can get a epiphone that does the same trick...
Gibson pups are all original, except for one that have Bare Knuckle pups in it. These guitars consist of Les Pauls, SG, ES-339, ES-335, and Explorer.
In the various Epiphone guitars that I own, I have the following:
Epiphone original set
Phat Staples - matched set
P-Rails with push pull pots
P-Rails with Triple-Shot
Matched set 59's
Matched set Antiquity
Jb and 59
These pickup combinations are in different Epiphone guitars, which consist of SG, Les Pauls, and Sheraton II.
AT this stage, I no longer see the need to pay big money for Gibsons, especially since I was paying less than 300 in the mid-60's for the Gibsons and they were not considered to be the cream of the crop as was Gretch, Rickenbacker, and Fender - back then...
Post your responses - I don't care, I play what I want and say the same... If you want to make a statement, play it on your guitar and then we can cut heads and see who know what is what! (Several members have heard me play and know that i know what I am talking about!)
PS: Merry Christmas - Open your presents and practice and get better, I am waiting to cut your head off...