EVH sig Phase 90
- Thread starter Mr Wolf
- Start date
kevlar3000
Bullet Proof Toneologist
Re: EVH sig Phase 90
Switchable mod is very cool, blue LED rocks and the paint job is just the icing on da cake
Switchable mod is very cool, blue LED rocks and the paint job is just the icing on da cake
rspst14
Tone Cat
Re: EVH sig Phase 90
Or why not just get a block logo pedals from the late 70's/early 80's? According to analog Mike at www.analogman.com, the original block logo pedals do not sound any different than the script logo pedals. I don't know why DUnlop insists on soldering the switch directly to the board, when they know damn well that makes it pretty much impossible to true bypass.
Ryan
Or why not just get a block logo pedals from the late 70's/early 80's? According to analog Mike at www.analogman.com, the original block logo pedals do not sound any different than the script logo pedals. I don't know why DUnlop insists on soldering the switch directly to the board, when they know damn well that makes it pretty much impossible to true bypass.
Ryan
sooperunkn
New member
Re: EVH sig Phase 90
Does anyone know if this pedal is True Bypass? For that price I hope so.
Does anyone know if this pedal is True Bypass? For that price I hope so.
Vasshu the humanoid typhoon
Unseen
Re: EVH sig Phase 90
Bwadr true mypass
Bwadr true mypass
Vasshu the humanoid typhoon
Unseen
Re: EVH sig Phase 90
True bypass is annoying, it adds noise, extra dufs when engaging the pedal as well.
And when the chain gets long the effect is negible at best.
I know that alot swears by this, I don't.
A well designed buffer will cut down on noise and statics, plus most switching annoyances will be out of the door.
Best way to run pedals is with a loop system, then they are completly out of the signalchain when not engaged.
True bypass is annoying, it adds noise, extra dufs when engaging the pedal as well.
And when the chain gets long the effect is negible at best.
I know that alot swears by this, I don't.
A well designed buffer will cut down on noise and statics, plus most switching annoyances will be out of the door.
Best way to run pedals is with a loop system, then they are completly out of the signalchain when not engaged.
rspst14
Tone Cat
Re: EVH sig Phase 90
That's correct. Unfortunately, Dunlop pedals do not have a well-designed buffer. In fact, I don't think they have any type of buffer circuitry. I could be wrong, but they will suck your tone, and they can't be true bypassed, which is one of the reasons why the older MXR pedals are more desireable than the newer Dunlop pedals. True bypass is a good option for most pedals, but if you run a lot of effects, you'll want to throw in some buffered pedals to help preserve your signal. There is a true bypass wiring mod that can prevent the popping from happening, but it kind of depends on the pedal. I run two pedals with normal true bypass wiring, and neither of them pop when switched.
Ryan
Rid said:
That's correct. Unfortunately, Dunlop pedals do not have a well-designed buffer. In fact, I don't think they have any type of buffer circuitry. I could be wrong, but they will suck your tone, and they can't be true bypassed, which is one of the reasons why the older MXR pedals are more desireable than the newer Dunlop pedals. True bypass is a good option for most pedals, but if you run a lot of effects, you'll want to throw in some buffered pedals to help preserve your signal. There is a true bypass wiring mod that can prevent the popping from happening, but it kind of depends on the pedal. I run two pedals with normal true bypass wiring, and neither of them pop when switched.
Ryan
Vasshu the humanoid typhoon
Unseen
Re: EVH sig Phase 90
But anyways I am never going to like tb very much, personally I think it is a religion of sorts
hehe
Yep a few makes the switches work good, but they are also somewhat costly
But anyways I am never going to like tb very much, personally I think it is a religion of sorts
hehe
Similar threads
