Floyd Rose problem?

Altitudes911

Altitudes911

New member
I have replaced my licensed floyd rose on my Jackson Kelly, and after setting up the strings and tune in, i see the tail of the floyd is elevated. for like 1 cm from the guitar body, so what should i do to lower it? by tighten the screw at the back of the spring box? i want to have it attached to the guitar body as all the FR i have seen and not elevated.

thanks a lot.
 
Re: Floyd Rose problem?

Yes, tighten the claw screws, located under the bridge to bring the back of the Floyd down. You will find yourself going back and forth as you fine tune the tuning to keep the bridge floating and the string to pitch.
 
Re: Floyd Rose problem?

TwilightOdyssey said:
Yes, tighten the claw screws, located under the bridge to bring the back of the Floyd down. You will find yourself going back and forth as you fine tune the tuning to keep the bridge floating and the string to pitch.
Click to expand...

thanks for reply.. just one small detail, should i unblock the head locks first?
 
Re: Floyd Rose problem?

Altitudes911 said:
thanks for reply.. just one small detail, should i unblock the head locks first?
Click to expand...
NP,man ... Yes, unlock the nut, or the bridge won't be very happy! :)
 
You must log in or register to reply here.
Back
Top