Franknfilms
New member
I have two chrome covered pickups for sale.
1.) Seymour Duncan SH-5 Custom...HOWEVER, this has a Unoriented Roughcast Alnico 5 magnet in it. That's right, the blueman custom UOA5. The cover is the seymour duncan brand cover. 11" of lead. Zebra under the cover. SOLD
$50 shipped, US, paypal
2.) Air Classic Bridge DP191
I actually used this as a neck pickup, there is about 12" of lead. This is this the dimarzio brand cover. Black under the cover. SOLD
$48 shipped, US, paypal
Both of these pickups are 100% working order. The heavy discounted prices are due to the less than professional/factory cover installation. I covered the slugs with a piece of tape, chipped a little bit of wax in the cover, heated it up, pressed in and soldered the pickup. These covers were installed correctly, there is zero feedback after installing the covers. However, it looks slightly sloppy on the back side, perfect on the front side.
Also, there are noticeable scratches on both covers, very tiny, impossible to see from a distance. Finally, the lead wires were slightly burnt, again, 100% working order. DO NOT do business with me if this is something that you will have a problem with. I guarantee these pickups will work and will buy them back if for some reason they didn't.
100% positive forum trading experience, 100% on ebay.
1.) Seymour Duncan SH-5 Custom...HOWEVER, this has a Unoriented Roughcast Alnico 5 magnet in it. That's right, the blueman custom UOA5. The cover is the seymour duncan brand cover. 11" of lead. Zebra under the cover. SOLD
$50 shipped, US, paypal
2.) Air Classic Bridge DP191
I actually used this as a neck pickup, there is about 12" of lead. This is this the dimarzio brand cover. Black under the cover. SOLD
$48 shipped, US, paypal
Both of these pickups are 100% working order. The heavy discounted prices are due to the less than professional/factory cover installation. I covered the slugs with a piece of tape, chipped a little bit of wax in the cover, heated it up, pressed in and soldered the pickup. These covers were installed correctly, there is zero feedback after installing the covers. However, it looks slightly sloppy on the back side, perfect on the front side.
Also, there are noticeable scratches on both covers, very tiny, impossible to see from a distance. Finally, the lead wires were slightly burnt, again, 100% working order. DO NOT do business with me if this is something that you will have a problem with. I guarantee these pickups will work and will buy them back if for some reason they didn't.
100% positive forum trading experience, 100% on ebay.
Last edited:
