Alvin Lee Fan
New member
I have a couple P90s I'm going to put in my LP Pro. Antiquity bridge model and Vintage neck. They'll replace some Lawrence L-560s I have in there now. However, due to construction specs on the guitar and the pickups, the Ant will go in the neck spot and the Vintage in the bridge spot. The Vintage is taller, the Ant is shorter and I need height in that bridge spot and extra clearance in the neck spot.
I thought for grins I might swap some magnets around. The Ant is A2 and the Vintage is A5. I see there's two magnets under the bobbin, one on each side of the pole screws. If I swapped a magnet on each pickup so they both had a A5 slug and an A2 slug, would that work? Would it do anything tonewise? I thought maybe it would brighten the neck and warm the bridge just a tad.
I seek the wisdom of the collective :bowdown:
Here's the intended home
I thought for grins I might swap some magnets around. The Ant is A2 and the Vintage is A5. I see there's two magnets under the bobbin, one on each side of the pole screws. If I swapped a magnet on each pickup so they both had a A5 slug and an A2 slug, would that work? Would it do anything tonewise? I thought maybe it would brighten the neck and warm the bridge just a tad.
I seek the wisdom of the collective :bowdown:
Here's the intended home