Headless Guitar Wall Hangers

[ehdwuld]

Got full metal and hang your guitar inverted on 2 bout hooks

so to understand correctly

put two eye bolts in the bottom and hook it on two nails

or

install a leather loop across the end of the neck and hang it from a nail, a hook, or an existing wall hanger

I like it

 

[Fender_Punk]

Just put a normal hanger up and put the guitar in it upside down, so the hook cradles the body.

 

[ehdwuld]

Just put a normal hanger up and put the guitar in it upside down, so the hook cradles the body.

yeah
its where the heaviest part of the guitar is on top of a swiveling mount

I just see it spinning and throwing the guitar to the floor

 

[ehdwuld]

so I saw a strandberg wall mount with a 3D printed thing that mounts to the wall
and the rear strap button slips into a slot on the top to hold the guitar to the wall

https://ebay.us/m/oeGINS

I also found a one inch section of perforated square tubing that I can size down to do the same thing



all I have to do is cut across every other hole in the perforated tubing
and use the two holes to mount it to the wall

then install a strap button to the back of all my headless, doesnt have to be in a strap location, this will just be for the hanger

 

[Coma]

 

[ehdwuld]

I do have some real estate on the back of my nubs
who makes that one?

 

[Mincer]

View attachment 6325606View attachment 6325607

This is a really cool, ergonomic idea. I can see something that doesn't even use a standard guitar hanger, something that matches with a hook on the wall.

 

[Coma]

I do have some real estate on the back of my nubs
who makes that one?

Dingwall. Can't say I love the design, but it is clever. Their basses also sound freaking great.

 

[Coma]

This is a really cool, ergonomic idea. I can see something that doesn't even use a standard guitar hanger, something that matches with a hook on the wall.

https://www.dartshopper.eu/koto-dartboard-bracket/?gad_source=1&gad_campaignid=20039496907&gbraid=0AAAAAphWIl3MfIIDuu_ExQc-bw5YsrkYl

 

[Mincer]

https://www.dartshopper.eu/koto-dartboard-bracket/?gad_source=1&gad_campaignid=20039496907&gbraid=0AAAAAphWIl3MfIIDuu_ExQc-bw5YsrkYl

Something like that, but a little more elegant.

 

[Coma]

Something like that, but a little more elegant.

You'd be hard pressed to find something less elegant

 

[ehdwuld]

I was looking at these as well

Cabinet latch vertical

 

[ehdwuld]

I was also looking at just a strap over the end of the nubby end to loop over a hook

A set of these leather straps
Knock thw button off and use a short pickguard screw to pin it to either side of the nut

Acoustic Straps

 

[ehdwuld]

Ok so i decided to try the strap over the end method . Like Mincer said it should just loop over a hook on the wall

Some acoustic guitar leather straps



And some pickguard screws to pin it on either side of the nubby

 

[Mincer]

As long as the leather is secured well, that seems like a great solution.

 

[ehdwuld]

So I did the strap on the nubby thing

Got some acoustic strap button adapters
Leather strap button adapters 6 pk

Then drilled out the button



Then got some #6 pan head screws 3/8 inch long
And #6 washers


Then drilled a short pilot hole in the nub on either side and affixed the strap




Works just great

 

[jeremy]

hows it attach to the guitar?

 

[ehdwuld]

hows it attach to the guitar?

I was in the middle of adding pics when you replied

Look again

 

[ehdwuld]

Probably not the best idea but

 

[Mincer]

Providing the cradle doesn't spin freely, you're set!