Help: 2 Humbuckers 2 Push Pull

[boingboing]

Hi!

I'd like to wire 2 humbuckers to a 3 way blade switch, to 2 push pull... without tone or volume.

Can you help me?

Thank you! :thanks:

http://img44.imageshack.us/img44/8382/2humbucker3way2pushpull.png

 

[MojoMonster]

Re: Help: 2 Humbuckers 2 Push Pull

Hi!

I'd like to wire 2 humbuckers to a 3 way blade switch, to 2 push pull... without tone or volume.

Can you help me?

Thank you! :thanks:

http://img44.imageshack.us/img44/8382/2humbucker3way2pushpull.png

What do you want the push/pulls to do?
Coil cut?
Parallel?
Phase?

MM

 

[boingboing]

Re: Help: 2 Humbuckers 2 Push Pull

Hi!

I'd like to coil split, to use only one coil!

Thank you!

 

[boingboing]

Re: Help: 2 Humbuckers 2 Push Pull

Thank you very much!

I understand the blade switch better now!

Although I still wonder about many other things...

1. What does the 'C' on the blade switch for?

2. If I don't wanna use the volume pot and tone pot, can I wire the two green and bare directly to the output jack? And wire the bridge wire directly to the output jack as well. I'd like to try the easy way first, it's the first time I do that... and I have no experience at all... and not much tools, and not much wires... lol...

3. Can I use any type of wire for the little blue wires that connect neck and middle on the blade switch for example? Same with the balck ones on the push pull switch?

Thank you! Your diagram is very well done!

Also, they should really include instruction sheets with the pots and the 3 way!!!

 

[boingboing]

Re: Help: 2 Humbuckers 2 Push Pull

Thank you very very much Hermetico! You've been of tremendous help!

I'm only missing the output jack, when I get it, I'll start wiring my guitar

If I get into trouble, I'll reply back ;P I hope everything will go fine though

Also, if you don't mind answering these last questions for me;

1. Is coil splitting different than parallel/serie?

2. If I lower the output of the signal via amp, is it pretty much the same as lowering the volume on the guitar?

 

[boingboing]

Re: Help: 2 Humbuckers 2 Push Pull

Thank you very very very much for your replies and input!! :thanks:

But I have yet, one last question (sorry to bother you again...!);

About the .022 AWG gauge wire, could you please link me to an online place where it sells that if you know any? Thank you...

If I could get 5 feet or something like that, of the highest quality...? (Unless it costs like 1 billion per feet of course ;P)

Thank you!