Help for wiring PG pup

[escobarf]

Hi friends!
I need your advice for wiring a Pearly Gates neck pup at my Gibson SG. I have two doubts:
- The original Gibson's 490T has only one wire but the PG has four colour wires;
- I can't find the electrical scheme at the net.

Many thanxs in advance and best wishes:banana: ,

Pedro

 

[Simon_F]

Re: Help for wiring PG pup

For standard humbucker wiring:

Twist and solder the red and white wires together and mask the bare end with tape.

Solder the black wire to the lug of the volume pot (same lug the core wire of your Gibson pickup was soldered to).

Solder the green and bare wires to the back of the volume pot (where the braid of your Gibson pickup was soldered to).

That should do it!