Help Hot rails - Vintage rails –Cool rails

[snowman]

Help Hot rails - Vintage rails –Cool rails

Hot rails - Vintage rails –Cool rails

Ok I have a strat copy that I intend to swap those pu in.
All those pu that I have are meant to be bridge.
I believe that is ok, since the hot rail is hottest :naughty:
It is ok. The reason is that I already had the hot rails and cool rails.
Hot rails 16,9
Vintage rails 2,67
Cool rails 10,3
I also intend to have 3 mini switches, one for each pu.
So I can have the serial, parallel and single coil.
The question is, since the Vintage rails and cool rails are meant to be bridge do I have to wire them differently?
And do any of you guys have schematics fore thise? :scratchch

With greetings from the top of the world.
Einar Har
Snowman

 

[sujithedwin]

Re: Help Hot rails - Vintage rails –Cool rails

Re: Help Hot rails - Vintage rails –Cool rails

I have a Hot rail neck in my Yamaha..i just hate the tone so, i am planning to put a classic stack plus stk-4. I need something that can throw some dynamics..ceramic is a disaster when it compare to ALNICO!! cheers..

 

[jeremy]

Re: Help Hot rails - Vintage rails –Cool rails

Re: Help Hot rails - Vintage rails –Cool rails

if you have an older vintage rails it might be hardwired in parallel which wouldnt let you wire it the way you plan.

you will be fine with the other two, no difference due to being bridge models.

if you have a newer vintage rails you can wire that as you want with out any wiring issues