This is my first experiment in installing pickups. I'm trying to install the Seymour Duncan Slash pickups that have just a single braided cable similar to the Burstbucker Pro.
I have removed the little PCB clip and trimmed back some of the black wire. I have soldered the black wire to the black wire coming from the pickup and the green wire from the clip to the metal braided section from the pickup. However, I am getting no sound when I plug it back into the PCB.
This seems so simple. Am I not doing something correctly? I've made sure the connections are solid and the solder is holding the wires in place solidly as well.
I have removed the little PCB clip and trimmed back some of the black wire. I have soldered the black wire to the black wire coming from the pickup and the green wire from the clip to the metal braided section from the pickup. However, I am getting no sound when I plug it back into the PCB.
This seems so simple. Am I not doing something correctly? I've made sure the connections are solid and the solder is holding the wires in place solidly as well.
