Help Please - Good wiring gone bad

[DR Ron]

Hi all

Okay I have a Squier strat. I have two Humbuckers
1. SD Pearly Gates Neck
2. SD Lil JB JR Bridge

Middle Pickup removed.

What I'm trying to do:

Switch Up
p1 - Neck Humbucker
p2 - Neck Split (South)
p3 - Neck Humbucker - Bridge Humbucker
p4 - Bridge Split (South)
p5 - Bridge Humbucker

Switch Down
p1 - Neck Humbucker
p2 - Neck Split (North)
p3 - Neck Split (North) - Bridge Split (North)
p4 - Bridge Split (North)
p5 - Bridge Humbucker

Obviously my current configuration is NOT working.

In addition I have no idea how to wire in the TBX so I get both the Treble Cut, and the Bass Cut.

I have found several diagrams that show each part but none together <SIGH>

Please help. Suggestions welcome.

Thanks a lot - Ron

 

[Funkfingers]

Re: Help Please - Good wiring gone bad

The standard two-pole, eight contact selector switch cannot offer neck + bridge pickups in position 3. You require either an Oak Grigsby 12-contact switch or a 24-contact Superswitch.

 

[DR Ron]

Re: Help Please - Good wiring gone bad

Okay thank you.

Is it possible to do a coil cut with 1 2 way switch (up - humbuckers) (down - split coil)

 

[BriGuy1968]

Re: Help Please - Good wiring gone bad

Okay thank you.

Is it possible to do a coil cut with 1 2 way switch (up - humbuckers) (down - split coil)

As long as the switch is a DPDT you can split up to two pickups at once with it... one on each pole.