hey guys very new to this, i got a stagg x300(bc rich ripoff) but i was thinkin of changin the bridge pickup, say i get a pickup how the hell do i wire it and make it work? can any one give ,e stages or anyting, thanx.
Hi, welcome to the forum! As far as how to wire it, you would take the hot (black) wire from the SD pickup solder it to the switch and take the ground (green) wire and shield and solder those to the back of the volume pot. That should take care of it.
No problem, bro. If you have any questions, ask away. Most people here are really cool and will answer most questions to the best of their ability. Good luck on the wiring!
