How do I properly adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SLS ?

[Markee]

How do I adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SLS Lefty
http://www.schecterguitars.com/guitars/blackjack-sls-c-1-a-lh-detail

 

[Swyse]

Re: How do I properly adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SL

The center screws on either side of the pickup raise and lower the pickup, tightening raises the pickup, loosening them lowers the pickup.

With actives I start as close as I can without it hitting the strings while fretted. After that its personal preference. Don't be afraid to play with the heights, its all reversible and you might find a tone you like better than your current tone.

 

[JB_From_Hell]

Re: How do I properly adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SL

Set them where they sound good.

 

[Markee]

Re: How do I properly adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SL

Thanks for the replies just wondering also if theirs any particular exact height recommendation for active pickups or for the AHB-1
Like Gibson and Fender both have there listed height recommendations does Seymour Duncan have any also ?
Mean in-case I mess it up I can always just set it back to specs.

 

[ItsaBass]

Re: How do I properly adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SL

Rule of thumb for actives: Start with them as close to the strings as you can without them interfering with the strings when you are playing.

 

[GuitarDoc]

Re: How do I properly adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SL

How do I adjust the height of AHB-1 BlackOuts on a Schecter Blackjack SLS Lefty
http://www.schecterguitars.com/guitars/blackjack-sls-c-1-a-lh-detail

One way is to screw the height adjusting screws in or out.