Mountain111Man
New member
Hello all, first post here. Straight to the point, I am installing all new pickups, pots, switches, etc. The setup will be HSH with Triple shots at the Neck and bridge. As I understand the triple shots can be wired like a single coil, so my question is, can I follow wiring diagrams for a Stratocaster setup like so?https://docs.google.com/gview?embed...-content/uploads/2016/05/3S_5W_1VppENB_2T.pdf
(Hopefully that link works, I am on mobile)
I want to be able to turn on either the bridge or neck with a push/pull master volume pot (I would prefer this over a toggle switch but would settle) to allow seven pickup selections with a 5 way switch.
Also, is there any benefits to having the two tone pots each have their own capacitor? I'd like to have a tone for the bridge and neck each, with the middle being paired with whichever of the two makes most sense.
All advice is welcome, thanks everybody, love the community here been doing a lot of reading.
(Hopefully that link works, I am on mobile)
I want to be able to turn on either the bridge or neck with a push/pull master volume pot (I would prefer this over a toggle switch but would settle) to allow seven pickup selections with a 5 way switch.
Also, is there any benefits to having the two tone pots each have their own capacitor? I'd like to have a tone for the bridge and neck each, with the middle being paired with whichever of the two makes most sense.
All advice is welcome, thanks everybody, love the community here been doing a lot of reading.
