I need your help

[skidd]

Hi Guys,
I need your help with a wiring issue.

I have a full shred (bridge) hot rails (neck) , I want to use a push pull pot for master vol/coil taps (for both pups) with a 3 way swith (blade/strat style). Does anyone have a diagram for this or that could post a walk though of it?

Thanks Scott (The Newbie) :dance:

 

[Artie]

Re: I need your help

Hi skidd; welcome to the forum.

Use this basic one:

http://www.seymourduncan.com/website/support/schematics/2hum_vol_3way-w-split.html

Your 3-way will probably look a bit different, but the wiring should be similar.

Then, just connect the "other" pup's red/white wire to the unused side of the switch, duplicating the right side.

Let us know if you still need help with it.

 

[skidd]

Re: I need your help

Thank you very much.

The 3 way that is in the guitar has 4 tabs on each side. How would I wire that?

 

[skidd]

Re: I need your help

Anyone?

 

[Artie]

Re: I need your help

I believe your switch would wire up like this one:

http://www.seymourduncan.com/website/support/schematics/std_tele.html

Just substitute your pups for the ones in that pic. (Its the switch wiring thats pertinent.)

 

[skidd]

Re: I need your help

Thanks,I try it tonight.