Identifying Switch Contacts on CTS Push Pull Pots

[jbsalt]

Hi, all. I'm wiring some SD Pups with some CTS Push pull pots, and I'm having difficulty determining which switch contacts are which based on the SD wiring diagram that I'm using.

For example, on the attached volume/ tone pot pix, what are the identifiers (1, C1, 2, etc) for each of these in their respective orientations? Or.. Which connectors are the red/white wires being connected to (C1 or C2?) and which connector is the wire that is soldered to the pot going to (1, 2, 3, or 4) ?

Thanks!!

 

[beaubrummels]

Re: Identifying Switch Contacts on CTS Push Pull Pots

I don’t know what you mean with the numbers, but the lugs closest to the pot in the drawing are the lugs closest to the pot physically on the actual push-pull, which corresponds to the up position when pulled up, splitting the pickups.

 

[David Garner]

Re: Identifying Switch Contacts on CTS Push Pull Pots

I found these. Hope they help.

https://www.sixstringsupplies.co.uk/product/cts-push-pull-pot-250k


http://www.stewmac.com/freeinfo/i-0227/0227_diagram.gif