TheToiletStore
New member
how much does it cost to have a pickup installed.
Is doing it myself difficult?
Is doing it myself difficult?
instalation help!!!!!
- Thread starter TheToiletStore
- Start date
Re: instalation help!!!!!
Welcome to the forum.
I had never tried soldering in my life and now I do it all the time. It is pretty easy to do. Try starting with a pencil soldering gun aroung 25 to 30 watts. I use a 45 and 25, but be careful with anything over 25 untill you get used to it. If you are replacing stock pup that you are not to concerned about try cutting the leads to where you have about a inch still connected to the pots and then twist them to your new pups leads. It is easier to do that then to solder to the pots right of the bat.
There is some good sites you can check out. Here is one.
http://www.digitalprosound.com/2003/09_sep/tutorials/soldering101.htm
Have fun.
Tyler
Welcome to the forum.
I had never tried soldering in my life and now I do it all the time. It is pretty easy to do. Try starting with a pencil soldering gun aroung 25 to 30 watts. I use a 45 and 25, but be careful with anything over 25 untill you get used to it. If you are replacing stock pup that you are not to concerned about try cutting the leads to where you have about a inch still connected to the pots and then twist them to your new pups leads. It is easier to do that then to solder to the pots right of the bat.
There is some good sites you can check out. Here is one.
http://www.digitalprosound.com/2003/09_sep/tutorials/soldering101.htm
Have fun.
Tyler
Toenail-Tommy
New member
Re: instalation help!!!!!
and installing your own is fun, and gives you a great understanding of how it all works...
and installing your own is fun, and gives you a great understanding of how it all works...
