Installing 59b In The Neck - Which Way Poles?

[Demanic]

Re: Installing 59b In The Neck - Which Way Poles?

So that would be screws closest to brideg right? So as if I'm putting it in the bridge, but I just move it up to the neck hole. This seems to be the most recommended way. Just trying to get it right first go so I don't have to undo everything again.

Wiring...? I have done a full strip-out rewire before with push-pull coil splits, so its not my first time, and I put the Dime in. I'm wondering how I wire it.

Well, no, I would do the opposite and put the screws closest to the fretboard side.

Sent from my Alcatel_5044C using Tapatalk

 

[Mincer]

Re: Installing 59b In The Neck - Which Way Poles?

I like the screws toward the fingerboard, but to me it isn't a night and day difference. I do understand not wanting to have an upside down logo. You can also remove the logo, too. I think it is worth experimenting to see which one you like, even if it is a pain- you would then know the difference in sound for the future.

 

[eclecticsynergy]

Re: Installing 59b In The Neck - Which Way Poles?

I concur: in a 24 fret guitar I'd try it screws towards neck to start with. Especially with a Floyd.