Invader SH8N install in shecter hellraiser

[graffiti297]

I'm replacing the EMG89 neck pickup in my 2009 hellraiser avenger with a Sh8n invader. The emg has 7 pins and the Sh8n has 5 wires.

I'm preparing to replace the potentiometer and do some rewiring, but before I do that. Is there a way to wire the 5 wires from the new pickup to the seven that run to the potentiometer(and other things) that were from the EMG?

Sent from my XT1080 using Tapatalk

 

[GuitarDoc]

Re: Invader SH8N install in shecter hellraiser

Two of the existing wires are probably to the battery. You don't need those with a passive pup. Just take out the battery and the wires attached to it and use the 5 remaining...

http://www.seymourduncan.com/wiring...,bridge-h,1-volume,1-tone,none,accessory-none