Is there no wiring diagram for a Humbucker+Single?

[Mallowpuff]

Hey, Seymour Duncan forumers! I just recently got two guitars from my uncle, both were in pretty bad shape so I decided to strip them down and re do everything. The one I'm working on right now has a neck single and a bridge humbucker. So I'm looking for a wiring diagram for a Humbucker+Single with a tone pot, a volume pot and a 3 way switch.

 

[cardinal]

Re: Is there no wiring diagram for a Humbucker+Single?

I assume you mean a 3-way blade rather than 3-way toggle?

http://www.guitarelectronics.com/pr...uckers3-Way-Lever-Switch1-Volume1Tone000.html

Just pretend one of the humbuckers is a single coil.

If it's a toggle, that's even easier to wire:
http://cdn.seymourduncan.com/pdfs/support/schematics/3ws_trans.pdf

 

[teleblooz]

Re: Is there no wiring diagram for a Humbucker+Single?

As long as you're not doing a series/parallel/split/tap with the bucker, using a standard telecaster wiring diagram will do the trick.
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=standard_tele

If your 3 way is a Gibson type: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w

 

[Mallowpuff]

Re: Is there no wiring diagram for a Humbucker+Single?

Thanks, guys! cardinal, it's a 3 way toggle switch. And for tele, I'm just wiring it so that the humbucker is one pickup if that's what you're talking about in the first part. I was kinda thinking about doing it so that the humbucker would act like two singles but after looking it up it seemed quite difficult for a first wiring + I would a different switch.

 

[Funkfingers]

Re: Is there no wiring diagram for a Humbucker+Single?

The more "individual" one's wiring requirements become, the mode likely it is that the schematic diagram falls outside the usual range that could reasonably be expected of any manufacturer.

Time, instead, to begin assembling one's own diagrams from snippets of the pre-existing, well-known offerings.