Jimmy Page Wiring Diagram

[EvilestBig]

Can anyone show me the Jimmy Page wiring diagram without the coil split humbuckers!??!

 

[AlexR]

Re: Jimmy Page Wiring Diagram

Not quite getting the Q.

Do you mean that you have 2 conductor humbuckers and you want to do JP wiring.....or that you want the diagram without the coil splits in it??

 

[EvilestBig]

Re: Jimmy Page Wiring Diagram

The diagram without the coil splits!

 

[AlexR]

Re: Jimmy Page Wiring Diagram

Solder/Tape red and white for both pickups.

All other wires go where they went anyhow, but follow the green (neck) connection through on the diagram to the next push pull and solder it there. Same for the black bridge wire.

 

[GilmourD]

Re: Jimmy Page Wiring Diagram

Isn't the point of JP wiring the coil splits?

Sent from my VK810 4G using Tapatalk

 

[Funkfingers]

Re: Jimmy Page Wiring Diagram

The point of the so-called JP circuit is to make all of the possible coil interconnections permutations available - regardless of whether they are usable or not.

 

[GilmourD]

Re: Jimmy Page Wiring Diagram

The point of the so-called JP circuit is to make all of the possible coil interconnections permutations available - regardless of whether they are usable or not.

Which, incidentally, why I reverted my old LP to standard wiring after having JP wiring in it for a while. I found I just wasn't using the other sounds.

However, I guess the question here is what does the OP actually want his guitar to do? All that's really left without the coil cuts is the phasing and the series/parallel switch. EvilestBig, is that what you want?

 

[EvilestBig]

Re: Jimmy Page Wiring Diagram

Yes!!!!

 

[GilmourD]

Re: Jimmy Page Wiring Diagram

Yes!!!!

And just to be clear, the phasing and series/parallel switches I'm thinking of would only work in the bridge and neck combo. It wouldn't have any effect on the bridge alone or the neck alone.

 

[EvilestBig]

Re: Jimmy Page Wiring Diagram

That's perfect!