Lets see those pedal boards you are using right now.

Re: Lets see those pedal boards you are using right now.

Quick mock up. Need to order some temple audio plates and George L cables.

One Control Loop Pedal>Go Go Tuner
One Control Loop Pedal>DOD Carcosa>Wilson Funk Factory Wah (Ibanez WH-10)>Lovepedal COT 50 HW>Wampler Tumnus>Mr. Black Deluxe Plus

595c25298f0b474f141179115ea50129.jpg


This is for my '57 Gibson GA 6. I may put together a digital preamp board with a cab sim. as an alternative for a Helix (both for headphone use only). However, I do still want one lol.

Sent from my LG-H931 using Tapatalk
 
Last edited:
Re: Lets see those pedal boards you are using right now.

Here's what I'm using right now...

IMG_1224.jpg

Signal chain goes like this:
Guitar -> Compressor -> Tuner -> SD 805 low gain -> Super Badass Distortion mid/high gain -> Marshall for clean/dirty switching -> amplifier

EFX loop -> volume -> wah -> EP Boost -> Chorus -> Delay -> return to amp (Marshall DSL40)
 
Last edited:
Re: Lets see those pedal boards you are using right now.

I have a layout set for my GA 6 board. The Tumnus is going to be retrofitted into the klone enclosure for sh!ts and giggles. Need to order some George Ls and Mogami patch cables to hook it up. I'm using a temple audio board, so I may add a patch/power bay.
afd2dce25d631e0248fa14d9b1702b6f.jpg


86264299dd2426cf100795d49f9d7eca.jpg



Sent from my LG-H931 using Tapatalk
 
Re: Lets see those pedal boards you are using right now.

Homemade board with all the essentials, minus the amp switch.
9bf760e53f0cd42427bb3755d372876c.jpg


Sent from my SAMSUNG-SM-G891A using Tapatalk
 
Re: Lets see those pedal boards you are using right now.

I have a layout set for my GA 6 board. The Tumnus is going to be retrofitted into the klone enclosure for sh!ts and giggles. Need to order some George Ls and Mogami patch cables to hook it up. I'm using a temple audio board, so I may add a patch/power bay.
afd2dce25d631e0248fa14d9b1702b6f.jpg


86264299dd2426cf100795d49f9d7eca.jpg

I wouldn't put the Tumnus in the Klone enclosure. Just an LED and an input and output jack. Can't get more transparent than that.


Sent from my iPhone using Tapatalk Pro
 
Re: Lets see those pedal boards you are using right now.

Not quite that bare bones but I could throw an ABY, a Rangemaster and a Tuner on a board and call it a day.
I'll add an OD booster in front of the ABY when the mood strikes me.
Otherwise, I've shelved my gate...and my polytune as well in and use a tuning app on my phone or tablet instead.

The Radial ABY is great and has a Drag control dial which essentially "corrects" or lowers the capacitance from long cables. I use 20ft cables because I like to walk around my condo. The Drag control boosts my signal back up keeping it bright, tight and lively. Without it things get dull, lazy and dark sounding in comparison.
.
 
Last edited:
Re: Lets see those pedal boards you are using right now.

I'll add an OD booster in front of the ABY when the mood strikes me.
Otherwise, I've shelved my gate...and my polytune as well in and use a tuning app on my phone or tablet instead.

The Radial ABY is great and has a Drag control dial which essentially "corrects" or lowers the capacitance from long cables. I use 20ft cables because I like to walk around my condo. The Drag control boosts my signal back up keeping it bright, tight and lively. Without it things get dull, lazy and dark sounding in comparison.
.

I use the Fulltone True Path ABY with the soft switches. It has switchable buffers. They're off as of now. There is a klone on the current board and it's buffer does the trick.
 
Re: Lets see those pedal boards you are using right now.

Yep or one of the older DOD chorus boxes as well...
Rather like my Icebox...it does not sound like a Boss, but more like an old Arion, I normally use chorus with a slower sweep but not with this little blue thing, got that nice sound I like.
Still have my Maxon CS-505 Insta-Chorus as well....
 
Re: Lets see those pedal boards you are using right now.

Just finished putting this one together (save for patch cables, which I should have come Sunday). Had a busy week - installed Fromel mod in the BF2, and put together the patch bay and little shelf for second row. RV6 just moved in as well.


b710fffba27e86aa9dc0508eb6409544.jpg
5f4c3e3dd1941fdf908e6f7dcaf9a63d.jpg
 
Last edited:
Re: Lets see those pedal boards you are using right now.

Latest update! [emoji41]

dc8ff6593b5f41049c23a478bc126a67.jpg



Sent from my iPad using Tapatalk
 
Re: Lets see those pedal boards you are using right now.

IMG_20180810_133339640_LL~2.jpg
Top row is effects channel
Bottom 2 are in front of amp
Left bottom is vocals.
Kind of weird but there it is.
 
Back
Top