Lets see those pedal boards you are using right now.
- Thread starter guitarSQUIRELL
- Start date
Rich_S
HomeGrownToneBrewologist
Re: Lets see those pedal boards you are using right now.
I just swapped out my DIY Stratoblaster in favor of the Mooer Yellow Comp. I'm working up material for a casual little Police/Pretenders project, and figured I need a compressor on the board. The Yellow Comp does wonders for my Hamer Sunburst when I'm copping jangley James Honeyman-Scott stuff like "Brass In Pocket".
I just swapped out my DIY Stratoblaster in favor of the Mooer Yellow Comp. I'm working up material for a casual little Police/Pretenders project, and figured I need a compressor on the board. The Yellow Comp does wonders for my Hamer Sunburst when I'm copping jangley James Honeyman-Scott stuff like "Brass In Pocket".
v8stang289
New member
Re: Lets see those pedal boards you are using right now.
Re-did my board today
Recently replaced my old Crybaby Wah with a 535Q. Finally got around to attaching the pedals and trying to organize everything
Re-did my board today
Recently replaced my old Crybaby Wah with a 535Q. Finally got around to attaching the pedals and trying to organize everything
Last edited:
v8stang289
New member
NoOnesFang13
New member
Re: Lets see those pedal boards you are using right now.
How do you like the Booster Shot? Seems like a really cool boost
Latest update to my big board. Still a work in progress.
Sent from my iPhone using Tapatalk
How do you like the Booster Shot? Seems like a really cool boost
stevie_bees
Cat In The Hatministrator
Re: Lets see those pedal boards you are using right now.
I like it a lot, and have found that I leave it on more than I turn it off. Usually I only turn it off if I use the phaser, as that has a nice boost to it, and it's just a little too much when they're on together. That being said, the Booster Shot into the 805 then both sides of the Fulldrive gives a wonderful lead tone.
I like it a lot, and have found that I leave it on more than I turn it off. Usually I only turn it off if I use the phaser, as that has a nice boost to it, and it's just a little too much when they're on together. That being said, the Booster Shot into the 805 then both sides of the Fulldrive gives a wonderful lead tone.
Lewguitar
New member
Re: Lets see those pedal boards you are using right now.
Ok. My rig has changed a lot. That's my old PRS Custom 22 with Antiquity humbuckers that I've had a long time.
But I've been playing through a Vox AC30 and a two 12 Matchless cab with a pair of Celestion Alnico 12's from the 60's, and a newish Blackstar Artist with two Celestions. I keep the volume low and clean and my overdrive comes from pedal board.
I have a TC tuner into a Klon KTR into a Hermida Dover Drive into a Strymon Timeline into a TC Hall of Fame 2 Reverb.
I use the Klon for more transparent overdrive sounds and the Dover Driver for Eric Johnson style violin tones.
Ok. My rig has changed a lot. That's my old PRS Custom 22 with Antiquity humbuckers that I've had a long time.
But I've been playing through a Vox AC30 and a two 12 Matchless cab with a pair of Celestion Alnico 12's from the 60's, and a newish Blackstar Artist with two Celestions. I keep the volume low and clean and my overdrive comes from pedal board.
I have a TC tuner into a Klon KTR into a Hermida Dover Drive into a Strymon Timeline into a TC Hall of Fame 2 Reverb.
I use the Klon for more transparent overdrive sounds and the Dover Driver for Eric Johnson style violin tones.
Lewguitar
New member
Re: Lets see those pedal boards you are using right now.
Almost always one or the other. There's a big volume jump when I use both, unless the Klon is set as more of a clean boost. If I set the Klon as a clean boost, then I can drive the Dover Drive with it and they sound great together.
Almost always one or the other. There's a big volume jump when I use both, unless the Klon is set as more of a clean boost. If I set the Klon as a clean boost, then I can drive the Dover Drive with it and they sound great together.
Lewguitar
New member
Re: Lets see those pedal boards you are using right now.
The Dover Drive and Klon sound so different from each other that I rarely have both on at the same time.
The Klon can get a ton of overdrive but it's always transparent and not overly bassy. And it cleans up when I use the guitar's volume control.
The Dover Drive sounds best set for a warm, fat, slightly fuzzy tone with more bass. Then it gets really close to the sound Eric Johnson gets stacking his Tube Driver and Fuzzface.
Eric uses a Dover Drive on the small pedal board he brings to clinics.
The Dover Drive and Klon sound so different from each other that I rarely have both on at the same time.
The Klon can get a ton of overdrive but it's always transparent and not overly bassy. And it cleans up when I use the guitar's volume control.
The Dover Drive sounds best set for a warm, fat, slightly fuzzy tone with more bass. Then it gets really close to the sound Eric Johnson gets stacking his Tube Driver and Fuzzface.
Eric uses a Dover Drive on the small pedal board he brings to clinics.
PFDarkside
of the Forum
Re: Lets see those pedal boards you are using right now.
Board by Keeley?The most basic of my pedal board setups.
Sent from my Alcatel_5044C using Tapatalk
80's_Metal
Underglazed Hair Metalologist
Re: Lets see those pedal boards you are using right now.
Backup rig left:
Donner dt1 tuner
Ehx East River drive
Ehx Pocket Metal (custom paint)
Joyo 7 band eq
Donner noise killer
Ehx memory toy
Main rig right:
Crybaby from hell
Korg pitchblack tuner
Ehx East River drive
DigiTech Metal Master
Isp decimator noise gate
Mxr Zakk Wylde black label chorus
Tc electronics flashback delay
Backup rig left:
Donner dt1 tuner
Ehx East River drive
Ehx Pocket Metal (custom paint)
Joyo 7 band eq
Donner noise killer
Ehx memory toy
Main rig right:
Crybaby from hell
Korg pitchblack tuner
Ehx East River drive
DigiTech Metal Master
Isp decimator noise gate
Mxr Zakk Wylde black label chorus
Tc electronics flashback delay
Last edited:
Jeffblue
New member
Re: Lets see those pedal boards you are using right now.
Newly built, One Control Xenagama, Korg Pitchblack Advanced, Wampler Ego, Fuchs Plush Valve Job, Line 6 HX Stomp, VHT Valvulator and Vox MV50 Clean (that is not being used for now) into Peavey Rockmaster loaded in a Carvin Bel Air cab (amp chassis removed) into a 1969 Fender Bandmaster Reverb head.
Newly built, One Control Xenagama, Korg Pitchblack Advanced, Wampler Ego, Fuchs Plush Valve Job, Line 6 HX Stomp, VHT Valvulator and Vox MV50 Clean (that is not being used for now) into Peavey Rockmaster loaded in a Carvin Bel Air cab (amp chassis removed) into a 1969 Fender Bandmaster Reverb head.
Last edited:
Re: Lets see those pedal boards you are using right now.
NM, just google machined it. didn't know they made a "junior"
whats w the red weeping demon?Latest iteration
NM, just google machined it. didn't know they made a "junior"
Last edited:
Coma
Well-known member
Re: Lets see those pedal boards you are using right now.
Skickat från min SM-G955F via Tapatalk
It's not great but it was very, very cheap. And it sticks around because I always have other pedal priorities.
Skickat från min SM-G955F via Tapatalk
