Re: Lets see those pedal boards you are using right now.
Several updates for both longcat and myself.
First of all, my brand new Lead 12 pedalboard:
Built this one specifically for my Lead 12 Mini Stack, NPBD
here. Took the tuner from my big board, and liberated the Phase 90 from longcat.
The board is a Holeyboard Amptop; power courtesy of a Visual Sound One Spot.
Signal chain is: Pitchblack -> Pickup Booster -> Phase 90 -> OD-9 -> CH-1 -> DD-2 (~300ms)
Pedalboard V4:
My 'big' board had the smallest update; moving the Pitchblack to my Lead 12 board and replacing it with a Pitchblack Portable. I'm not 100% sold on it's polyphonic capability, but the built-in cable tester is nice to have.
The board is a Holeyboard Evolution Wide; power courtesy of a Voodoo Lab Pedal Power Mondo.
Signal flow is set up to mimic a two-amp rig I had briefly in the mid 2000s.
Guitar -> vibe -> wah -> switcher (clean / dirty / tuner loops)
Clean: MIJ CS-3 -> GT-500 -> CE-2 -> FRV-1 -> TR-2
Dirty: Tumnus -> UFO (fuzz / octave) -> Micro Flanger -> MIJ DD-3 (~300ms)
Tuner: Korg Pitchblack Portable
The signal and switch outputs from the Loopmaster go to a junction box hidden under the left end of the riser.
longcat board V3:
I wanted my EVH Phase 90 back, so longcat needed a
new phaser.
The board is a Holeyboard Evo amptop; power courtesy of a Voodoo Lab Pedal Power 2 Plus located under the board.
Signal chain is: Pitchblack -> Octave -> Retro-Sonic -> Pickle Pie B -> CE-2B -> BF-2
Original NPBD
here, while V2 is
here and V3 is
here.