Thank you very much nexion218! If you don't mind I need to ask one more question.That link was to a 3 way blade switch and I have a switchcraft, les paul style toggle. I found the diagram for the toggle on that site but Im still a little confused. Both pickups are Seymour duncans, An alnico 2 in the bridge and a Five-two for strat in the neck. The wire that is throwing me is the wire coming out of the center lug on the switchcraft between the hot for the single coil and the north for the bridge. In the diagram, that wire is blue and connects to the left lug of the volume pot beside the hot from the output jack. Is this blue wire in the diagram a ground? All reference I could find said the switchcraft center was a ground as well as the two grounds that are connected on the other side of the switch. If it's a ground why is it connected to one side of the volume pot with the second pot tab being connected to the hot on the output. It's just confusing to me that on a volume pot you would have the folded back tab as a ground and now this second blue wire as a ground also , with the hot from the output in between them.. Just trying to understand. Thank you for any light you can shed on this, as the title says , i'm a newbie to this. and thanks again for your help.
