magnets
- Thread starter castiron
- Start date
JB_From_Hell
Jomo's Nimions
Re: magnets
This seems to be a controversial subject; not so much among forum members, but more so among different pickup manufacturers.
I think the general consensus here is that (put very simply) ceramic = hotter output and more treble, alnico 2 = less output, more vintage tone and more mids, and alnico 5 is kind of a compromise between the two.
This seems to be a controversial subject; not so much among forum members, but more so among different pickup manufacturers.
I think the general consensus here is that (put very simply) ceramic = hotter output and more treble, alnico 2 = less output, more vintage tone and more mids, and alnico 5 is kind of a compromise between the two.
Luke Duke
PRSlustologist
Re: magnets
also the ceramics are stronger magnets and therfore have a larger field and can pull strings easier. Tonally I think magnets are like JB said. Also I'd like to add that they have a more aggressive sound. I will try to illustrate how my ears hear the difference.
A5 sounds ------------- fairly straight and solid
A2 sounds --.--.--.--.--. small nuances of softer sound
Ceramic sounds --+--+--+--+ small nuances of a harder sound
Hope this helps!
Luke
also the ceramics are stronger magnets and therfore have a larger field and can pull strings easier. Tonally I think magnets are like JB said. Also I'd like to add that they have a more aggressive sound. I will try to illustrate how my ears hear the difference.
A5 sounds ------------- fairly straight and solid
A2 sounds --.--.--.--.--. small nuances of softer sound
Ceramic sounds --+--+--+--+ small nuances of a harder sound
Hope this helps!
Luke
Travis
New member
Re: magnets
Swiped from a simliar thread over on the Hamer board a few minutes ago.
"Ceramics are the strongest, and the AlNiCos as commonly used rank, in order of descending strength, A5, A2, A3.
All else equal, the stronger the magnet, the higher the output and the stronger the low lows and high highs. So ceramics will be brighter and stronger than the rest, and A2 will be softer and seemingly have more midrange - because they have attenuated highs and lows.
Most humbuckers use a 'standard' magnet size, same as Gibson used in humbuckers and P90s. Super high output humbuckers occasionally have three ceramics, though - the X2N, Invader, and Gibson 500T are like this."
Swiped from a simliar thread over on the Hamer board a few minutes ago.
"Ceramics are the strongest, and the AlNiCos as commonly used rank, in order of descending strength, A5, A2, A3.
All else equal, the stronger the magnet, the higher the output and the stronger the low lows and high highs. So ceramics will be brighter and stronger than the rest, and A2 will be softer and seemingly have more midrange - because they have attenuated highs and lows.
Most humbuckers use a 'standard' magnet size, same as Gibson used in humbuckers and P90s. Super high output humbuckers occasionally have three ceramics, though - the X2N, Invader, and Gibson 500T are like this."
