Need a wiring diagram

[DKSEARS]

I nearing the finish line on a project. Once my pickups are delivered and I can get time to wire them up. My latest build will be complete.

I am planning a two humbucker Strat style body and have the pick guard cut for a single volume and tone with a three way toggle in between them.

I want to wire the volume (or tone) to a push pull pot which will act as a master parallel / series switch. The idea is that with the switch up, it would parallel and switch down it would be series. This would give me six total combinations that I think would be usable.

I've looked at the SD and DiMarzio diagrams and can't seem to find one like this.


Sent from my iPhone using Tapatalk

 

[Toner]

Re: Need a wiring diagram

did you check the diagrams section on guitarelectronics.com? you can get the 2 pickup diagram like you are looking for: I think #4 is what you are looking for. http://www.guitarelectronics.com/pr...uckers3-Way-Lever-Switch1-Volume1Tone003.html

then reference this chart, for pickup color codes, depending on what pickups you are getting, then write them in on the diagram above: http://www.guitarelectronics.com/ca...wiring_diagrams.humbucker_wiring_color_codes/

2 Humbuckers w/ 1 Volume Control, 1 Tone Control & 3-Way Lever Switch
0. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever switch
1. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + push/pull switch for dual coil tap
2. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + push/pull switches to coil tap each pickup
3. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + push/pull switches for reverse phase and dual coil tap
4. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + push/pull switches to select series-parallel for each pickup
5. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + push/pull for dual coil tap & master series parallel
6. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + mini switches to select series-split-parallel for each pickup
7. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + mini switches for series-split-parallel & master series-parallel
8. 2 Humbuckers 1 Vol, 1 Tone, 3-way lever + mini switches for series-split-parallel, phase & master ser-par
.

 

[DKSEARS]

Re: Need a wiring diagram

Thanks, Toner. That's the closest I've seen for this.


Sent from my iPhone using Tapatalk