Need help w/Coil Tap

[jrb1976]

I'm replacing a broken coil tap on my Fender Strat Special. It has an HSS configuration.

There is one tone knob (2 pots), one volume, a 5 way switch, and a coil tap switch for the HB. The coil tap switch has 6 connectors, 3 on each side. The humbucker has 3 wires (red, green, and white) that are disconnected. The 5 way switch has a thicker white wire which is disconnected. I know they get soldered to the coil tap switch/grounded, but in what configuration? Any useful help will guarantee my eternal gratitude. Thanks from a wiring bonehead.

 

[jeremy]

Re: Need help w/Coil Tap

welcome to the forum!!

this is the basic schematic, depending one what brand of pup the humbucker is the color codes of the wires may be different. do you know what brand it is?

http://www.seymourduncan.com/support/schematics/hum_sing_sing_1vol_1tone_5w.htm

this is the schematic for the split coil. you only use one half of the switch to split one pup, leave the other side

http://www.seymourduncan.com/support/schematics/hr2.html

 

[jrb1976]

Re: Need help w/Coil Tap

Sorry. It's a Seymour Duncan.

Thanks.