Need help with wiring

Nuttttttttttttt

New member
So recently I have bought new EMG pickups and I got the 81/SA/85 to install. However, I can't find any sort of diagram and I don't know how to set it up.

I'll be adding one tone and volume, and the 81 is going in the bridge, the SA in the middle and the 85 a the neck, all solder connections

If anyone could draw me up a schematic or tell me.precisely how to wire it, it'll be greatly appreciated
 
Re: Need help with wiring

That's a fairly standard setup did you try EMG's site? They should have that diagram on there for that.
 
Re: Need help with wiring

The EMG 85 and 81 wire up exactly the same as the single coils such as SA. So any EMG instruction sheet for 3 single coils would provide what you need.

You can find the instructions 81+SA+SA HSS setup, but again there is no actual difference in the connections.
 
Re: Need help with wiring

Ok so basically if I check the schematics that would wire a three single coil strat setup, it wouldn't matter if two of them are humbuckers because the wiring is practically the same?
 
Re: Need help with wiring

I've checked and I found the three single coil setup for a strat but I wasn't sure if it would be able to incorporate two humbuckers because maybe it would require a different wiring setup, but I don't think it requires any differences???
 
Re: Need help with wiring

Ok so basically if I check the schematics that would wire a three single coil strat setup, it wouldn't matter if two of them are humbuckers because the wiring is practically the same?

You need a 3 active pickup diagram, not singles/humbuckers

Something like "David Gilmour EMG" but with 1V / 1T



Oh here we go:
3aS_5W_1V_1T.jpg



Pot values can be pretty much anywhere from 10k to 100k btw.... batteries-wise, 1 is minimum, but 2 or 3 can be daisy-chained for 18v / 27v mod (changes sound)
 
Last edited:
Back
Top