Paralell/Series Out of Phase Question

[The Usual]

I converted my SG neck pickup to 4 conductor, and wired it paralell and seires with a push pull pot. I also flipped the magnet to get out of phase with the bridge bucker, when in the middle position. The push pull pot is the neck volume pot.

When the neck pot is pulled out to get paralell and I am in the middle position out of phase, I only get the real thin quack when the volume knobs of both pickups are right up at 10. Even the slightest turn down, takes me right out of that quack. Is this normal?

 

[DrNewcenstein]

Re: Paralell/Series Out of Phase Question

Should be, as that's the out-of-phase tone.

 

[The Usual]

Re: Paralell/Series Out of Phase Question

So you can't control the tone at all when out of phase?

 

[ehdwuld]

Re: Paralell/Series Out of Phase Question

I have my RG2 wired with a Series/out of phase position on the 5 way switch
it is very thin and quacky and the tone control does little to relieve the Nasal tone

I LIKE THAT!