Parallel Axis Appreciation Thread

Re: Parallel Axis Appreciation Thread

My PATB-1 set, in my LP Custom, is in my top 3 favorite guitars. (And I'm not an LP kinda guy.) They're hard to describe. Hifi-ish, almost perfect tonal balance. I had a PATB-3 once and traded it for something. I need to get one back. The PATB-3 is to the PATB-1 kinda like a PG is to a Seth. Just a wee bit more bite and punch.
 
Re: Parallel Axis Appreciation Thread

The PATB series aren't found commonly in most local stores. That's probably why they don't have as abundant following among Duncan customers, that and probably the looks, it might be making people rethink their choice. If a bunch of well known players endorsed them then perhaps more people might be interested in them.
 
Re: Parallel Axis Appreciation Thread

I used a PATB-2 in my Jackson for a long time and it is a great pick up.
 
Re: Parallel Axis Appreciation Thread

+1 on the PATB-3.
Great singing bridge pickup with excellent definition and nice cleanup.
A good bit of PAFish character there, even in its bone stock version.
 
Re: Parallel Axis Appreciation Thread

I wish the PATB-1n came in Trembucker spacing. The bridge model is too hot for me, and the Blues Saraceño too bottom heavy and anemic in the mids (and a bit too hot). As mentioned, I have two PATB-1ns in my Ascari. They sound great, but I really wish the bridge pickup pole pieces lined up better, since pole spacing is supposedly important to the design of the pickup.
 
Last edited:
Re: Parallel Axis Appreciation Thread

ItsaBass said:
I wish the PATB-1n came in Trembucker spacing. The bridge model is too hot for me, and the Blues Saraceño too bottom heavy and anemic in the mids (and a bit too hot). As mentioned, I have two PATB-1ns in my Ascari. They sound great, but I really wish the bridge pickup pole pieces lined up better, since pole spacing is supposedly important to the design of the pickup.
Click to expand...

Huh? It is Trembucker spacing. It's literally in the name... PATB = Parallel Axis Trembucker.
 
Re: Parallel Axis Appreciation Thread

PATB-1n on top, PATB-1b on bottom:

qs5KEkj.jpg
 
Re: Parallel Axis Appreciation Thread

Masta' C said:
Most Gibsons and Epiphones since the mid-'80s have trem-spaced bridges. Drives me crazy that more people aren't aware of this. That's why their newer bridge models are labeled "T" (500T, 498T, 490T, etc) and their neck pickups are labeled "R" (for Regular spacing)
Click to expand...

Haha. Well it is for rhythm and treble. But the spacing is accurate.


Sent from my iPhone using Tapatalk
 
Re: Parallel Axis Appreciation Thread

Masta' C said:
Technically it is "Rhythm" and "Treble" (after all, Gibsons don't typically have a trem of any kind), but "T" pickups have 52mm spacing, which is even wider than DiMarzio's "F"-spacing (51mm) and much closer to Duncan's "Trembucker" spacing at 52.6mm.

My point is that Gibson has been using trem-spaced bridges along with the wider "T" series pickups in the bridge for 30+ years now. People often assume that Gibsons need narrower spacing in both positions, but this isn't true except on special models and vintage-correct reissues.
Click to expand...

100% correct


Sent from my iPhone using Tapatalk
 
Re: Parallel Axis Appreciation Thread

eclecticsynergy said:
+1 on the PATB-3.
Great singing bridge pickup with excellent definition and nice cleanup.
A good bit of PAFish character there, even in its bone stock version.
Click to expand...

How does it compare output-wise to the Custom? I'm thinking the PATB-1 might be just slightly too hot for my tastes, and the Custom is just about right.
 
Re: Parallel Axis Appreciation Thread

patb3 is hot paf territory, less push than the custom

a patb3 with a2 magnet is a very sweet pup, less bottom and more mids with a sweeter high end
 
Re: Parallel Axis Appreciation Thread

Toejam said:
Huh? It is Trembucker spacing. It's literally in the name... PATB = Parallel Axis Trembucker.
Click to expand...


First, "PATB" is not the "name" of the pickup. "PATB" is the alpha-numerical code used for PA pickups. The name of this pickup is "Parallel Axis Original."

Secondly, it comes in two variants: neck (standard spacing, classic wind), and bridge (TB spacing, hot wind). I would assume that anyone who had actually shopped for (and especially owned/used) one would know this.

That there is a PATB-1n with standard spacing should be understood after reading my post, which states that I use the neck model in both positions, and wish that it was was available with Trembucker spacing, to use the neck wind with bridge spacing. I obviously own the pickups; I'm not making stuff up. It's YOU who are making stuff up.

Not sure why your post is getting thumbed up, because it's flat-out wrong, not to mention its tone. You're already logged on to the Internet; you should do 60 seconds of basic research before attempting to refute someone with such self assuredness.
 
Last edited:
Re: Parallel Axis Appreciation Thread

ArtieToo said:
I'm fairly certain that ALL PATB's are trembucker spacing, regardless of their position. I'll dig mine out and measure it.
Click to expand...

Nope. The PATB-1n is standard spaced, and has a PAF-ish wind. I wasn't makin **** up!
 
Re: Parallel Axis Appreciation Thread

I’m wondering...
Since this is a non-traditional looking pickup, would it be available to purchase in a double cream style configuration?
 
Re: Parallel Axis Appreciation Thread

^ No. Black only.

But you could mask off the poles with liquid frisket, and finish the bobbins with a durable finish, like a urethane or epoxy.
 
You must log in or register to reply here.

Similar threads

C
JB2 parallel - almost perfect.
2
Replies
21
Views
350
Masta' C
Masta' C
S
Distortion Split vs. Parallel Tones
Replies
4
Views
54
freefrog
freefrog
alex1fly
Custom 8/59!
Replies
1
Views
71
Masta' C
Masta' C
Masta' C
Wait...Frankenstein "Plus" and "Classic"?! Did we know about these already?
Replies
14
Views
203
Masta' C
Masta' C
B
Wiring Diagram for HSS Strat with auto-parallel in position 2
2 3
Replies
43
Views
281
bassface732
B
Back
Top