Phase Push-Pull w/ Master Volume

[BluezPwr]

Hey Guys! A while ago I got some great wiring advise here and I'm hoping someone can help me again. I've got an '08 Les Paul which I'd like to wire as follows:

1x Master Volume
2x Tone (neck & bridge)
1x Push-Pull for In/Out of Phase

I'm not a huge fan of two volumes on a Les Paul, so I'm going to go to a Master Volume config and use the empty, 4th pot location as a push-pull (I'm not going to wire the pot in - just using a push-pull to maintain the appearance and provide the phase switching).

I haven't found a diagram that matches exactly what I'm looking for. SD has a lot of Phase dagrams, but none with 1V, 2T & 3-way. If anyone out there can help me, I'd appreciate it! THANKS!

 

[DrNewcenstein]

Re: Phase Push-Pull w/ Master Volume

Pickups to their Tone kobs, Tone knobs to the 3-way, 3 way out to the volume, volume to the jack should do it, though I think you can also wire the Tone pots to their respective sides of the 3-way as well as wiring the pickups to the 3-way.

Wire either pickup to the push/pull according to the Phase diagram, and you're done.

 

[BluezPwr]

Re: Phase Push-Pull w/ Master Volume

Thanks for the reply.

Just so I'm clear, the pickup (say it's the bridge) would hit the phase switch first, then the tone pot, then out to the 3-way and so on?