Phat Cat Wiring?

[kypes_w]

So here's what I want to do........I'm still new here. I have a phat Cat to install in my bridge position, but just run it with one volume knob, no tone knob. Anybody have schematics?

 

[Zhangliqun]

Re: Phat Cat Wiring?

Just solder the center wire of the Phat Cat (the black wire inside the braiding) to the lug of the volume pot that the old pickup was soldered to, then solder the braiding to the body of the pot. You're done.

 

[Artie]

Re: Phat Cat Wiring?

Yup. What he said. But here's a schematic anyway:

http://www.seymourduncan.com/support/schematics/sgl_coil_1vol.html

Just keep in mind, I'm not sure what the colors are on a Phat Cat.

 

[Zhangliqun]

Re: Phat Cat Wiring?

No colors, just the old-school PAF-style coaxial wire -- black center wire with braided shield/ground.

 

[Artie]

Re: Phat Cat Wiring?

Yeah, saw that, right after I posted. :smack:

 

[kypes_w]

Re: Phat Cat Wiring?

Alright, I'm a little late on the reply............but, yeah it's the single wire.Do I just go black wire to volume pot, to output?

Thanks again guys