innersightmatt
New member
Hi all i have a ibanez rg370 with a hum/sing/hum with a 5way switch stock. I have a JB bridge and a Jazz neck replacement. I have removed the single coil pu as i dont use it and want to wire up the two SD's to the 5way switch so that it creates the types as follows
position 1 - bridge
2 - bridge parallel
3 - bridge and neck
4 - inside coils
5- neck
i have read various examples on the SD website and on the ibanez website but none seem to be exactly what i want or dont work.
http://www.ibanez.com/wiring/wire.asp?y=2004&w=RGT42
this is the closest to what i am after but i tried this setup and it aint work!?! is that because the wiring colours are different for ibanez pu's?
Please Help!!
position 1 - bridge
2 - bridge parallel
3 - bridge and neck
4 - inside coils
5- neck
i have read various examples on the SD website and on the ibanez website but none seem to be exactly what i want or dont work.
http://www.ibanez.com/wiring/wire.asp?y=2004&w=RGT42
this is the closest to what i am after but i tried this setup and it aint work!?! is that because the wiring colours are different for ibanez pu's?
Please Help!!
Last edited:
