Any kind of switching device that would allow to terminate/connect a ground. Most use push/pull pots or 2 or 3 way mini switches. On some models Jackson uses a mega multi 5 way switch to put single coil voice on position 2 and 4. I dig using a switch in such a way.
I don't know if the Fluences can be hooked up that way.
They can, and are on various Jackson models. Granted, the megaswitch schematic is a bit tricky.
This model has it: https://www.jacksonguitars.com/en-U...es-dinky-dk-modern-evertune-7/2912001570.html
OK, so I just tried the Modern Alnico in the bridge position... man, what a killer-sounding pickup!
Overall, I find it's more like a Fishman version of the EMG 57 moreso than the 85. It's got more chunky low-end than the Modern Ceramic, and actually, more detail up top as well. So it's not as mid-focused. It's not as tight, but it's not nearly as bloated and stuffy as the EMG 85. Still not sure which I like more.
I like the broader character of the Alnico, but I like the focus and agression of the Ceramic.
Honestly, I love every single Fishman Fluence pickup I've tried... except for the Classic Neck, LOL.
Do you still find Voice 2 on the KSE in the bridge too SH-2-y? Voice 2 of the KSE Alnico isn't as low output or scooped compared to the Modern Alnico's Voice 2.Being an Alnico fan myself it is stinks that many of the Fluence Alnico pickups voice 2 is that scooped/neck/sh-2 voicing which is not much use in the bridge IMO. Wish there was a jumper or something that 'activated' neck mode so you dont miss out on the hot rod tone that is usually Voice 2.
FWIW, I used a KSE Alnico in the bridge of a Floyd Kramer and it was the cats meow. I think the 57/85 comparison is fair. There is something about that bloated 85 that works for me in the bridge outside of the tech metal. Kind of has a sweet bloom with the right amount of dirt.
Do you still find Voice 2 on the KSE in the bridge too SH-2-y? Voice 2 of the KSE Alnico isn't as low output or scooped compared to the Modern Alnico's Voice 2.
I'd actually be interested in trying my KSE Alnico in the bridge now.
I actually find it interesting that they describe the KSE as having *less* low end than the moderns. I've read both them being "tighter" and having "less low-end". Tighter maybe. Less low-end, no way. I've switched both sets back and forth in both my Les Pauls to see how they react to different guitars, and the KSE's actually have a tiny bit more. They may appear tighter (even thinner) because they've got less low mids and more upper mids, but the lowermost low-end is actually a tiny bit more.
Really? Where?At one time I had made an excel spreadsheets (saved somewhere?) with all the specs of the different pickups and listen to that youtube channel with all the comparisons...not sure that helped at all LOL
Really? Where?