Re-using bass strings without breaking?

[alex1fly]

Does anyone have tips for reusing bass strings without breaking them?

I have a set of flats that I adore, they've been on my bass for 3.5 years and went through 40+ gigs... but the bass they're on is calling out for a change.

It'd be heartbreaking to break one of them when stringing them back up in the future. There's a variety of opinions out there but figured I'd poll folks here.

 

[Demanic]

Why are you so intent on saving them?

Sent from my SM-A115A using Tapatalk

 

[Chris Pile]

It's a pain to take them off most basses. The curly parts that went around the tuning posts are tough to thread back through the bridge holes. I used to boil them with a drop of dishsoap to get the finger funk out of them, and then dry them with a good towel. They don't sound new, but they'll last for awhile.

 

[formula73]

I’m with you, dude. I’m just super careful pulling them off.

You guys must not understand how nice it is once they lose their zing and get that big, nice, James Jamerson fundamental going on.

 

[Mincer]

I've heard that there are few brands of flats that have that sound right out of the package. It isn't a sound I personally would go for, but it is worth researching.

 

[Demanic]

I’m with you, dude. I’m just super careful pulling them off.

You guys must not understand how nice it is once they lose their zing and get that big, nice, James Jamerson fundamental going on.

I don't like them once they lose the "zing".

Sent from my SM-A115A using Tapatalk

 

[formula73]

I don't like them once they lose the "zing".

Sent from my SM-A115A using Tapatalk

A lot of people do, myself included.

 

[Chris Pile]

I like zing, which is why I hated those black ones wound with plastic tape. One of my clients prefers the feel of roundwounds, and has me "age" new strings for that genuine Jamerson tone. I rub them with hand lotion a couple times, and then heat them to about 100 degrees in the toaster oven so it will melt and sink in. Instant 60's tone!

 

[formula73]

I like zing, which is why I hated those black ones wound with plastic tape. One of my clients prefers the feel of roundwounds, and has me "age" new strings for that genuine Jamerson tone. I rub them with hand lotion a couple times, and then heat them to about 100 degrees in the toaster oven so it will melt and sink in. Instant 60's tone!

Wow. I’m so corrosive I age a set of strings in a day, just playing lol

 

[Chris Pile]

Wow. I'm so corrosive I age a set of strings in a day, just playing lol

I have 2 clients like that. They both put extra plain strings through the tailpieces of their guitars and tape them to the top. Both guys can keep singing and restring their guitars without trouble. It's pretty fun to watch.

They both replace their bridges every year or so because they just dissolve from the acid.

 

[JB_From_Hell]

My two good basses have top loading bridges/tailpieces that don't require pulling the end of the string through a hole. It's a great feature on a bass, for exactly what you're describing. One of my guitars has a similar bridge, and it's a great feature on there, too.

If you have a regular Fender style bridge, the only thing you can do is be really careful removing and reinstalling the string.

 

[Demanic]

A lot of people do, myself included.

Different tastes.
It is hard to restring them when the tuner ends get crimped. As long as you don't overwork them at the bend, they should be ok.
Maybe soak them in alcohol to get rid string buildup.

Sent from my SM-A115A using Tapatalk

 

[formula73]

Different tastes.
It is hard to restring them when the tuner ends get crimped. As long as you don't overwork them at the bend, they should be ok.
Maybe soak them in alcohol to get rid string buildup.

Sent from my SM-A115A using Tapatalk

I once coiled them up in a small jar and filled it with acetone. A couple hours later, ZINGY. I wouldn’t try it on coated strings, though.

 

[Demanic]

Humans have no idea how much material they shed in any given moment.

 

[Chris Pile]

Humans have no idea how much material they shed in any given moment.

You got that right.

 

[Demanic]

Yeah, well...

Sent from my SM-A115A using Tapatalk

 

[Adieu]

How the eff do you break a bass string???

Also, you can solvent wash em to get them back to zingy.... WD40>Kerosene>90% Isopropyl iirc

 

[formula73]

Humans have no idea how much material they shed in any given moment.

We’re pretty nasty lol

 

[JB_From_Hell]

How the eff do you break a bass string???

Bending the portion that’s wound around the tuner too many times taking it on and off can break the core.

 

[mkhtfld76]

I put an old set of DRs on my jbass the other day. They arent as old as your flats but i dont see how you will break them if you arent doing something drastic to them. I have sets of old flats laying around and i intend to use them again in the future. Precision Flats. I dont even think i could break them by re-installing them but as I said,they arent as old as yours. James Jamerson broke a favorite string and sent it to the company asking if they could weld it or fix it in some way. Like Mr. Jamerson,if u break one you will just have to start over and beat the miniscule amount of brightness out of another set of new yet dead strings. I hear slathering them in mayonaise speeds up the deadening of the already dead strings. Precision Flats are the only flatwounds I have ever used and I dont understand how anyone can be so horrified by the sound of a fresh set. They are brighter when new but rolling back the tone knob a bit usually makes new flats sound like old flats. I put a set of halfwounds on my jazz bass last week and they werent on the bass 24hrs. Theyre in a box waiting to be installed on a stingray next. I have shoe boxes full of sets of old strings and i hqve never broken one re-installing them. I have broken a tuner installing old flats but never a string.

Sent from my SM-T590 using Tapatalk