ready to install

If I'm adding a treble bleed from middle lug of vol pot (to be able to use push/pull tone pot as switch) to tone pot (middle lug) is that going to work? Also, does the gray output jack cable get soldered onto a volume pot, along with the black cable in the middle of the pic (assuming it's grounding)?

Thanks for any tips!
 
the black and bare wire get grounded in that diagram. for a treble bleed, you want it across the two hot lugs so not sure what you are asking. you want to use a push/pull to turn the treble bleed on and off?
 
jeremy said:
for a treble bleed, you want it across the two hot lugs so not sure what you are asking.
Click to expand...
Bingo! Thank you, yes, that's what I was asking

=jeremy said:
you want to use a push/pull to turn the treble bleed on and off?
Click to expand...
YESSIR, if what I'm seeing in Phil McKnight's video
https://youtu.be/D4mgxGYA_6Y?t=885
 
You must log in or register to reply here.
Back
Top