S Sam SG Active member Dec 7, 2025 #1 What do you use to remove the Seymour Duncan badge off the bobbin of a HB without scuffing or leaving a dull spot?
What do you use to remove the Seymour Duncan badge off the bobbin of a HB without scuffing or leaving a dull spot?
S Sam SG Active member Tuesday at 12:46 AM #3 Ok so to revive this post. I tried removing the logo off my WLH I installed last week and I could not get it to budge. I used Turtle Wax polishing compound. Attachments 20260216_194551.webp 306.8 KB · Views: 0
Ok so to revive this post. I tried removing the logo off my WLH I installed last week and I could not get it to budge. I used Turtle Wax polishing compound.
Securb One of Jerry's Kids Tuesday at 1:00 AM #4 I have had good luck with polishing compound but have heard people say tooth paste works also.
S Sam SG Active member Friday at 5:55 AM #5 Securb said: I have had good luck with polishing compound but have heard people say tooth paste works also. Click to expand... Good idea. Im assuming paste and not gel type.
Securb said: I have had good luck with polishing compound but have heard people say tooth paste works also. Click to expand... Good idea. Im assuming paste and not gel type.
